Lab0_Intro_Handout_2006

Lab0_Intro_Handout_2006 - ECE 5613 Lab Introduction: Nuts...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Jan06 Page 1 Drayton ECE 5613 Lab Introduction: Nuts and Bolts of EE5613 A) HP 8753B, D Calibration Procedure Step-by-step calibration instructions are documented here for the HP 8753B and HP 8753D network analyzers. The instructions in the first column are for the 8753B. Any additional keys that must be pressed for operation of the 8753D are included in the second column. Hardware defined buttons on the front panel of the network analyzer are shown in brackets [ ] and soft-keys available immediately to the right of the display are shown in parentheses ( ). HP 8753B Operation Additional notes for 8753D 1. Power up the network analyzer. 2. Press the [CAL] button. 3. Press (CAL KIT). 4. Press (3.5 mm) Press (SELECT CAL KIT), (3.5mmD), then (RETURN). 5. Press (RETURN). 6. Press (CALIBRATE MENU). 7. Press (FULL 2-PORT) 8. Press (REFLECTION) 9.Find the HP 85033D calibration kit. 10. Carefully connect the sample labeled "OPEN" to port 1 by holding the sample and tightening, following all correct principles of microwave connector care. 11. Press (S11<FWD OPEN). Press (FORWARD OPEN). 12. Disconnect the "OPEN" sample from port 1 and attach it to port 2. 13.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 10/30/2009 for the course EE 5613 taught by Professor Staff during the Spring '08 term at Minnesota.

Page1 / 3

Lab0_Intro_Handout_2006 - ECE 5613 Lab Introduction: Nuts...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online