50%(2)1 out of 2 people found this document helpful
This preview shows page 1 - 2 out of 4 pages.
40 . How does voltage regulations circuitry placed inner a PCM manipulate the alternator output?If the PCM detects a charging gadget mistakes, it proclaims a low voltage telltale (ON) network conversation message which tells the cluster to light up the charge indicator. The charge indicator is illuminated if the PCM does no longer see a sign up the GENLI circuit for a time period greater than 500 milliseconds. This telltale command is likewise used to signify over-voltage situations detected via the PCM-controlled generator.each time the ignition transfer is cycled to the run role, the tool cluster initiates a bulb check via illuminating the price indicator. it's far the PCMs duty to trouble a low voltage telltale (OFF) command if the charging gadget is functioning effectively. This message need to be sent at some diploma within the network initialization in the voluntary phase (250 milliseconds to 450 milliseconds after the ignition transfer is cycled to the run position). If a low voltage telltale (OFF) communications community message is not obtained, the tool cluster maintains to slight up the price indicator indefinitely.forty three. How can an oscilloscope be used to check alternator output?to begin finding out the alternator the virtual garage oscilloscope need to be connected to the car. start the engine of the automobile, and thoroughly unscrew the battery from the clamps. next choose the AC or DC positions over the o-scope, it's far maximum suitable to maintain it in parade characteristic at the identical time because the severa waveforms are locating out. as quickly as this is accomplished it's going to probably be important to attach the oscilloscope’s horrible croc clip to the ground connection. Now be part of a prod to the remarkable clip, this is carried out so prod factor maybe related to the terminal. This have become certainly connected to the battery fine.