Avro SC270 Brochure

Avro SC270 Brochure - AVRO Model SC270 2.5m 6000 lb Single...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: AVRO Model SC270 2.5m 6000 lb Single Cage Man & Material Hoist 3.8m 1.5m Hoist cage Cable guide Cable trolley Cable trolley Tie-In assembly Mast section 1508mm Base enclosure Optional loading platform 1.2m 3.9m Landing gate AVRO HOIST COMPANY “Taking you above the rest” AVRO Model SC270 6000 lb Single Cage Man & Material Hoist TIE-IN PLAN VIEW C/L Mast & Car 4’-6” 1’-1 1/2” C/L Mast 6 7/8” Adjust in Field C/L Tie Car 4’-11” x 12’-6” x 8’3” 3’-11 1/8” C/L Car Edge of Building 6’-6” 6’-6” Adjust in Field Note: All hoist cages are designed and built in conformance with CAN/CSA-Z185-M87 local safety code. All sizes and dimensions are subject to change at any time without notice and must be verified by a local certified engineer. Any changes or modifications should be consulted with AVRO Hoist Co. MAST TIE CONNECTIONS Attached to embedded bracket in structural part of building Fixed with through bolts AVRO HOIST COMPANY “Taking you above the rest” AVRO Model SC270 6000 lb Single Cage Man & Material Hoist C/L Tie C/L Mast 4’-6” Adjust in Field C/L Mast & Car Note: Standard Avro Tie-In at 34’-6” maximum vertical intervals or as per local codes and standards. Edge of Building TIE-IN DETAILS AVRO HOIST COMPANY “Taking you above the rest” Standard Avro Tie-In brackets bolted to face of slab with (2) 3/4”f A325 bolts and cast-in anchors AVRO Model SC270 6000 lb Single Cage Man & Material Hoist FOUNDATION PLAN m 0m 45 -21 00 mm 2m 2. Double mesh reinforcement: 12mm diameter rebar 30 8m 00 2. 18 4. 130 4m 0m m 0m m SECTION “X-X” Deep C/L Mast 3” Clear #5 Reinforcing bars @ 12” C/C Max. Bott. each way 1’-0” Verify hoist dimensions prior to the foundation design. May require draining provision. Foundation frame must be embedded into the concrete slab. Note: Minimum soil bearing pressure required to be 3,000 PSF AVRO HOIST COMPANY “Taking you above the rest” AVRO Model SC270 6000 lb Single Cage Man & Material Hoist TECHNICAL DATA Configuration Rated load capacity Rated speed Counterweight Maximum travel distance Lifting device (Jump pole) capacity Safety device Worm gear ratio Brake rating (per car) CAR DIMENSIONS Inside length Inside width Inside height Front/rear gate opening width Front/rear gate opening height Optional side gate opening width Optional side gate opening Height ELECTRICAL DATA Power supply 3-Motor drive machinery: Horsepower Full load current Starting current Variable frequency drive Brake pwer supply WEIGHTS Gross weight (per car) Weight per mast section (4mm-8mm) Weight of travelling cable system Weight of Tie-In Weight of ground enclosure SC270TD Single cage hoist 6000 lbs 150 fpm (46 m/min) No 1476 ft 550 lbs Type D 16:1 155 ft-lb (210 Nm) SC270GZ Single cage hoist 6000 lbs 207 fpm (63 m/min) No 1476 ft 550 lbs Type D 12:1 155 ft-lb (210 Nm) 3.8m 1.5m 2.5m 1.5m 2m 2.5m 2m 3.8m 1.5m 2.5m 1.5m 2m 2.5m 2m 440-460/3/60 440-460/3/60 (3)x20hp(15kW) 92.6 Amp Varies 74hp (55kW) 195 V.d.c. (3)x25hp(18.5kW) 113.4 Amp Varies 100hp (75kW) 195 V.d.c. 5060 lbs 275-550 lbs 4 lbs/ft 10% of total mast weight 3260 lbs 5060 lbs 275-550 lbs 4 lbs/ft 10% of total mast weight 3260 lbs AVRO HOIST COMPANY “Taking you above the rest” ...
View Full Document

This note was uploaded on 11/29/2009 for the course ME D taught by Professor D during the Spring '09 term at Punjab Engineering College.

Ask a homework question - tutors are online