FinalPracticeQuestions

# FinalPracticeQuestions - PROBLEM 1 Elasticity PROBLEM 2...

This preview shows pages 1–4. Sign up to view the full content.

PROBLEM 1 - Elasticity

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
PROBLEM 2 Plasticity and Deformation
PROBLEM 3 - Creep A chemical reaction chamber, similar to the one shown below, is made of type 304 stainless steel. The cover bolts of the chamber, which are made of the same steel, are pre-tensioned at room temperature to a stress of 10,000 psi. The service temperature of this chamber is 1100°F. How long can the chamber be used at this temperature before the stress in the bolts drops below 5,000 psi at the operating temperature? . It may be assumed that the deflection of the flanges during the tightening is negligible compared to the extension of the bolts. This implies that the total strain remains constant throughout the life of the chamber. . You may assume a constitutive law for creep for 304 stainless steel of the form: ° ° ? = ± ² ² ? ³ ´ µ¶? ± −· ¸¹ ³ where σ o = 62 psi, m = 8, H = 5.85 x 10 -18 in- lb, k = Boltzmann’s constant (6.79x10 -23 in-lb/°R, °R = °F + 460) Note: The elastic modulus of the steel varies with temperature.

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
This is the end of the preview. Sign up to access the rest of the document.

## This note was uploaded on 12/14/2009 for the course MSE 113 taught by Professor Ritchie during the Spring '09 term at Berkeley.

### Page1 / 7

FinalPracticeQuestions - PROBLEM 1 Elasticity PROBLEM 2...

This preview shows document pages 1 - 4. Sign up to view the full document.

View Full Document
Ask a homework question - tutors are online