This preview shows pages 1–3. Sign up to view the full content.
This preview has intentionally blurred sections. Sign up to view the full version.View Full Document
Unformatted text preview: MSE C113 Mechanical Behavior of Materials Professor Ritchie Midterm Exam 1 Solutions Problem 1 (20 Points) a) 6 Points Acceptable answers include: T/T m < 0.3 Twinning, slip glide 0.3 < T/T m < 0.7 Climb and glide, grain boundary sliding T/T m > 0.7 Diffusional flow (bulk and boundary) - Dislocation plasticity o T/T m < 0.3 and stresses above the yield stress o T/T m = 0/3-0.6 at stresses below the yield stress as creep - Diffusional plasticity o T/T m > 0.6 and stresses below the yield stress as creep Grain boundary diffusion (low Ts within T/T m > 0.6) Bulk diffusion (high Ts within T/T m > 0.6) b) 12 Points Mixed Mixed Mixed Mixed Edge Edge Screw Screw The valid cross slip plane is plane 1 because in order for the dislocation to propagate, the plane that the dislocation is cross-slipping into must contain the burgers vector in order for it to continue dislocation movement The portion that can cross slip into plane 1 is the screw dislocation because it moves...
View Full Document
This note was uploaded on 12/14/2009 for the course MSE 113 taught by Professor Ritchie during the Spring '09 term at University of California, Berkeley.
- Spring '09