SAEP-1142 Qualification of NSA NDT personnel.pdf - Engineering Procedure SAEP-1142 Qualification of Non-Saudi Aramco NDT Personnel 4 December 2014

SAEP-1142 Qualification of NSA NDT personnel.pdf -...

This preview shows page 1 - 4 out of 11 pages.

Previous Issue: 19 May 2009 Next Planned Update: 4 December 2019 Primary contact: Al-Mudaibegh, Isa Houmud ( mudaibih ) on +966-13-8801940 Copyright©Saudi Aramco 2014. All rights reserved. Engineering Procedure SAEP-1142 4 December 2014 Qualification of Non-Saudi Aramco NDT Personnel Document Responsibility: Non-Destructive Testing Standards Committee Saudi Aramco DeskTop Standards Table of Contents 1 Scope .................................................................. 2 2 Conflicts and Deviations ..................................... 2 3 References .......................................................... 2 4 General ............................................................... 3 5 Training ............................................................... 4 6 Qualification of Examinations .............................. 5 7 Certification ......................................................... 7 Appendix I - Approved National Certification Programs ................................... 9 Appendix II - Individual Certification Techniques... 10 Appendix III - Saudi Aramco Required Practical Verification Examination s… ...... 11
Image of page 1
Document Responsibility: Non-Destructive Testing Standards Committee SAEP-1142 Issue Date: 4 December 2014 Next Planned Update: 4 December 2019 Qualification of Non-Saudi Aramco NDT Personnel Page 2 of 11 1 Scope This Saudi Aramco Engineering Procedure (SAEP) establishes the minimum training, examination, qualification, and certification requirements of contractor, subcontractor, consultant, or other non-Saudi Aramco personnel performing, interpreting, or otherwise affecting the results of Nondestructive Testing (NDT) operations during purchase, construction, or maintenance of plant and equipment being purchased, constructed, or operated for Saudi Aramco. Also, it provides minimum requirements for development of NDT contractors’ written practices. 2 Conflicts and Deviations 2.1 Any conflicts between this procedure and other Saudi Aramco Engineering Procedures (SAEP's), Engineering Standards (SAES’s), Mater ials System Specifications (SAMSS's), Standard Drawings (SASD's), or industry standards, codes, and forms shall be resolved in writing by the Company or Buyer Representative through the Manager, Inspection Department of Saudi Aramco, Dhahran. 2.2 Direct all requests to deviate from this procedure in writing to the Company or Buyer Representative, who shall follow internal company procedure SAEP-302 and forward such requests to the Manager, Inspection Department of Saudi Aramco, Dhahran. 3 References 3.1 Saudi Aramco References Saudi Aramco Engineering Procedure SAEP-302 Instructions for Obtaining a Waiver of a Mandatory Saudi Aramco Engineering Requirement 3.2 Industry Codes and Standards American National Standards Institute / The American Society for Nondestructive Testing, Inc. ANSI/ASNT CP-189 Qualification and Certification of NDT Personnel (2011 Edition) ASNT SNT-TC-1A Recommended Practice for Personnel Qualifications and Certification (2011 Edition)
Image of page 2