Unformatted text preview: KING FAHD UNIVERSITY OF PETROLEUM & MINERALS
Department of Electrical Engineering
EE 204 Sections 3&4
Design Project 5%
Due April 24, 2005 in the class
Evaluation will be based on:
• Report organization.
• Clarity of the work.
• Correct results.
• Submission on time.
• Each student must provide his own work and derivations. April 3, 2005 Maximum power transfer design
1) Use any analysis method to derive a formula for the current I in terms of the resistor RL.
2) Change RL to produce a table of RL versus the power P absorbed by RL (the current can
be used to calculate the power.)
3) Plot P versus RL and find the value of RL that gives maximum P
Use computer generated plots.
You have to carefully select the first value and the increment of RL in (2) to get a plot that
shows the maximum power. ...
View Full Document
This note was uploaded on 01/16/2010 for the course EE ee204 taught by Professor Profosama during the Spring '09 term at King Fahd University of Petroleum & Minerals.
- Spring '09
- Electrical Engineering