Prestressed Concrete - top =-0.666 1.4909-0.0357=0.789 MPa...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Prestressed Concrete Assuming the following : Area of reinforcement =774 mm 2 f’c = 35 MPa P=1.1 GPa Section Properties : I=(1/12)x30x55 3 =415937.5 cm 4 . A=30x50=1650 cm 2 Total loads on beam=3T/m Beam weight =23.5KN/m 3 *0.3*0.55=3.8775 KN/m M=wl 2 /8=30000*12 2 /8=540 KN.m Stresses at beam Centerline : f top= f
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Background image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: top =-0.666+1.4909-0.0357=0.789 MPa. f bot =-0.666-1.4909+0.0247=-2.13 MPa. Stresses at beam ends : f top =-0.666+1.4909=0.824 MPa. f bot =-0.666-1.4909=-2.156MPa. Deflection Immediately after cables are cut : D due to cable = = -2.716 cm D due to beam = = 6.338 cm...
View Full Document

This note was uploaded on 01/27/2010 for the course DS csc 270 taught by Professor Dr.m.g during the Spring '10 term at Notre Dame University-Louaize.

Page1 / 2

Prestressed Concrete - top =-0.666 1.4909-0.0357=0.789 MPa...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online