SampleLabPractical

SampleLabPractical - Please NOTE: Many of these questions...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon
1 Please NOTE : Many of these questions may not make much sense because they refer to visual material provided at the individual stations. However, this sample will give you an idea of the general format and the types of questions to expect It is IMPORTANT to keep in mind that this Quarter's lab practical exam will be different from this sample. Some questions may LOOK similar but differ in a subtle way, so do not assume if something looks similar it's the same question! Name Section BIS 2C Lab Practical - Sample Test Form Z Instructions: 1. Bubble in your student ID number on the scantron form using the first 9 spaces. 2. Fill in the Test Form Z bubble. 3. Enter the station number of the station where you are starting: Double-check to make sure you are filling in your scantron at the correct question number! Entering the answers at incorrect question numbers will result in a very low score. 4. Fold your exam in half lengthwise and keep your scantron inside as you move around the room. This will prevent others from seeing your answers. 5. Use pen for the short answer section, 6. On the written section be brief but complete. Do not assume the grader will "read between the lines." You will be graded on what you write, not what you meant to say. Good luck on the exam! There are XX stations with 1-2 questions per station. You will have 2 minutes per station. After everyone has rotated through all the stations you will have another 10-15 minutes to go back and review any station you wish. If someone is already at the station you wish to see, wait at a polite distance for them to finish. Please keep your eyes on your own exam.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
2 Multiple choice: Answer questions 1 through 28 on your scantron form. Choose the one , best answer. (Each question is worth 1 point) Station 1 1. In order to center the phase contrast rings, you need to adjust WHICH labeled part(s) on this microscope? a. A b. B c. C d. D e. E 2. When focusing to get the best image of a sample, you are least likely to damage the slide by using the following procedure: a. before looking through the eyepieces, move the stage as close to the objectives as possible; then look through the eyepieces and move the stage downward until the sample comes into focus b. before looking through the eyepieces, move the stage as far below the objectives as possible; then look through the eyepieces and move the stage upward until the sample comes into focus c. look through the eyepieces and move the stage up and down until the sample comes into focus d. give up in frustration without attempting to focus
Background image of page 2
Image of page 3
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 02/01/2010 for the course BIO SCI bis2c taught by Professor Doyle,eisen during the Fall '09 term at UC Davis.

Page1 / 10

SampleLabPractical - Please NOTE: Many of these questions...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online