IEEE Standars for Terminology and Test methods for Analog to DIgital Converters

IEEE Standars for Terminology and Test methods for Analog to DIgital Converters

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: IEEE Std 1241-2000 IEEE Standard for Terminology and Test Methods for Analog-to-Digital Converters Sponsor Waveform Measurement and Analysis Technical Committee of the IEEE Instrumentation and Measurement Society Approved 7 December 2000 IEEE-SA Standards Board Abstract: IEEE Std 1241-2000 identifies analog-to-digital converter (ADC) error sources and provides test methods with which to perform the required error measurements. The information in this standard is useful both to manufacturers and to users of ADCs in that it provides a basis for evaluating and comparing existing devices, as well as providing a template for writing specifications for the procurement of new ones. In some applications, the information provided by the tests described in this standard can be used to correct ADC errors, e.g., correction for gain and offset errors. This standard also presents terminology and definitions to aid the user in defining and testing ADCs. Keywords: ADC, A/D converter, analog-to-digital converter, digitizer, terminology, test methods The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright ß 2001 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 13 June 2001. Printed in the United States of America. Print: ISBN 0-7381-2724-8 SH 94902 PDF: ISBN 0-7381-2725-6 SS 94902 No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for any personal injury, property or other damage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance upon this, or any other IEEE Standard document. The IEEE does not warrant or represent the accuracy or content of the material contained herein, and expressly disclaims any express or implied warranty, including any implied warranty of merchantability or fitness for a specific purpose, or that the use of the material contained herein is free from patent infringement. IEEE Standards documents are supplied ‘‘ AS IS. ’’ The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase,...
View Full Document

This note was uploaded on 02/16/2010 for the course ELEC diseno taught by Professor None during the Spring '10 term at Universidad Tecnológica de Panamá.

Page1 / 98

IEEE Standars for Terminology and Test methods for Analog to DIgital Converters

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online