ME342-Mid1-Spring09 - Department of Mechanical Engineering...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Department of Mechanical Engineering, Yeditepe University ME 342 MACHINE ELEMENTS I – Namik Ciblak MIDTERM EXAM I, Spring 2009 NAME:____________________________________________________Time: 120 Minutes Open books and notes. Q.1 . (30%) The figure shows a pressure vessel resting on a flat support. The vessel contains a liquid pressurized to 10 MPa. The density of the liquid is 1000 kg/m 3 . Stresses are created due to the weights of the cylinder and the liquid, and, the internal fluid pressure. The cylinder should be treated as a thick-walled one. The point C is on the contact line, as shown. The point B is 0.5-mm above the point C. The point A is on the interior surface of the cylinder. a) Calculate the principal stresses at points A, B, and C. b) Determine the maximum von-Mises stress and its location. c) Determine the static safety factor using the distortion energy theory, if the yield strength of the cylinder material is given as 250 MPa....
View Full Document

{[ snackBarMessage ]}

Ask a homework question - tutors are online