Pt100_Sensor_2902-1_UK

Pt100_Sensor_2902-1_UK - Page 1 Design and specifi cations...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Page 1 Design and specifi cations subject to change without notice Data Sheet 2902-1 www.baumerprocess.com Description A platinum resistor is built into the temperature sensor. Changes in temperature are refl ected by changes in the electrical resistance, so that measuring the value of the resistance gives an analogue expres- sion for the actual temperature. The Pt100 element has a resistance of 100 Ohms at 0°C and a well- documented working curve (DIN/EN/IEC 60751) within the nominal working range. The sensors are used in a wide range of applications within the marine, industrial, energy and food sectors. The Pt100 sensor fi ts as an insert in sensor tubes with an internal diameter of 6 mm such as the CombiTemp tem pe ra tu re measuring system. Air sensors are used without sensor pockets to ensure fast response time. Sensors with 4-wire silicone cable for pockets or tubes 4-wire air sensors Elements in 1/1 DIN B, 1/3 DIN B and 1/6 DIN B The sensors can be used with the CombiTemp, Building Block Temperature Measuring System Cable Sensor, Pt100/Pt1000 Page...
View Full Document

This note was uploaded on 03/19/2010 for the course E-TECH e-tech taught by Professor Keijer during the Spring '10 term at Hogeschool Utrecht.

Page1 / 4

Pt100_Sensor_2902-1_UK - Page 1 Design and specifi cations...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online