# HW_CH_7 - Homework Homework Ch. 7 Ch. 7 2 Introduction to...

This preview shows pages 1–3. Sign up to view the full content.

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Homework Homework Ch. 7 Ch. 7 2 Introduction to Materials Science 7.3 A specimen of aluminum having a rectangular cross section 10 mm x 12.7 mm is pulled in tension with 35,500 N force, producing only elastic deformation. Calculate the resulting strain. . 7.6 Consider a cylindrical titanium wire 3.0 mm in diameter and 2.5x104 mm long. Calculate its elongation when a load of 500 N is applied. Assume that the deformation is totally elastic. 7.10 Figure 7.34 shows, for a gray cast iron, the tensile engineering stress–strain curve in the elastic region. Determine (a) the secant modulus taken to 35 MPa, and (b) the tangent modulus taken from the origin. 3 Introduction to Materials Science 7.17 A cylindrical specimen of a hypothetical metal alloy is stressed in compression. If its original and final diameters are 20.000 and 20.025 mm, respectively, and its final length is 74.96 mm, compute its original length if the deformation is totally elastic. The elastic and shear moduli for this alloy the deformation is totally elastic....
View Full Document

## This note was uploaded on 03/27/2010 for the course ES 162 taught by Professor Ang during the Spring '10 term at Yeditepe Üniversitesi.

### Page1 / 3

HW_CH_7 - Homework Homework Ch. 7 Ch. 7 2 Introduction to...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document
Ask a homework question - tutors are online