PHY134_Oscilloscope

PHY134_Oscilloscope - PHY134 The Oscilloscope Page 1 of 2...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
The aim of this experiment is to familiarize you with the use of a cathode-ray oscilloscope. This instrument will be employed in some of the later experiments, as well as in many electronics and research laboratoria, so it is important to clearly understand its principles and its operation. The Oscilloscope The oscilloscope is somewhat similar to a tradiditonal TV, where you have an electron beam in an evacuted tube hit a phosphor-coated glass screen to make light where it hits. (To borrow from the author Edward Abbey, the use of a vacuum tube explains why watching TV tends to suck your brains out). The electron beam is deflected up/down and left/right by voltage applied to some plates in a manner like Example 21.8 on p. 811 of your textbook. External voltages can be input to the y -axis or vertical amplifiers (typically on the left side of the scope) which control the vertical motion of the electron beam and thereby the vertical position of the spot on the phosphor- coated screen. The voltage on the x -axis amplifiers, controlling the horizontal motion ("time base") of the cathode beam, is generated internally. The internal horizontal voltage has a saw-tooth shape, moving the spot with constant speed from left to right, and then back almost instantaneously. The horizontal speed (i.e. the frequency of the saw-tooth) can be controlled by the "time-base" unit on the right. Because the time base voltage has a calibrated "sweep" time, the displayed signal can be read off as voltage (vertical) versus time (horizontal). The vertical signal can be amplified (calibrated amplification factors) and displaced vertically ("offset") over
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 04/14/2010 for the course PHY 134 taught by Professor Gurvitch,m during the Spring '08 term at SUNY Stony Brook.

Page1 / 2

PHY134_Oscilloscope - PHY134 The Oscilloscope Page 1 of 2...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online