Anti-Rust Treatment - AR-2 ANTI-RUST TREATMENT GENERAL...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon
GENERAL INFORMATION Anti-rust treatment is necessary before welding and before and after the painting process. ANTI-RUST TREATMENT BEFORE WELDING Weld-Through Primer (spot Sealer) 1. WELD-THROUGH PRIMER (SPOT SEALER) APPLICATION For anti-corrosion measures, always apply the weld-through primer (spot sealer) to welding surfaces where the paint film has been removed. HINT: Apply the weld-through primer (spot sealer) so that it does not ooze out from the joining surfaces. WELD-THROUGH PRIMER (SPOT SEALER) APPLICATION ANTI-RUST TREATMENT BEFORE PAINTING PROCESS Sealer Gun 1. BODY SEALER APPLICATION For water-proofing and anti-corrosion measures, always apply the body sealer to the body panel seams and hems of the doors, etc. BODY SEALER APPLICATION 2. UNDERCOAT APPLICATION To prevent corrosion and protect the body from damage by flying stones, always apply sufficient undercoat to the bottom surface of the under body and inside of the wheel housings. UNDERCOAT APPLICATION ANTI-RUST TREATMENT AR-2
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Steel Metal Undercoat (ED Primer) Anti-Chipping Paint Second Coat Steel Metal Undercoat (ED Primer) Second Coat Top Coat ANTI-RUST TREATMENT AFTER PAINTING PROCESS 1. ANTI-RUST AGENT (WAX) APPLICATION To preserve impossible to paint areas from
Background image of page 2
Image of page 3
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 10

Anti-Rust Treatment - AR-2 ANTI-RUST TREATMENT GENERAL...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online