Body Panel Construction - CN-2 BODY PANEL CONSTRUCTION...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon
mm in. 10 13 18 0.39 0.51 0.71 13 φ 18 φ 18 φ 13 φ 10 φ 10 φ STANDARD BODY MARKS Assembly Mark Center Mark Center Mark Assembly Mark Assembly Mark Assembly Mark BODY PANEL CONSTRUCTION CN-2
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
HIGH-STRENGTH STEEL (HSS) PARTS Generally, High-Strength Steel (HSS) is that which has an intensity value of at 35 kgf/mm 2 (343 MPa), and distinguished from mild steel. The handling of HSS is the same as for mild steel, but the following should be observed. 1. Panel Hammering: Because HSS is thinner than mild steel, care should be taken to avoid warping during hammering operations. 2. Removing Spot Welds: Because HSS is tougher than mild steel, damage will occur more easily to a regular drill. Therefore, an HSS Spot Cutter is recommended. Also, use a high-torque drill at low speed, and supply grinding oil to the drill during use. 3. Panel Welding: Panel welding procedures for HSS are exactly the same as for mild steel. Plug welding should be done with MIG (Metal Inert Gas) welder. Do not gas weld or braze panels at areas other than specified. BODY PANEL CONSTRUCTION
Background image of page 2
Image of page 3
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 05/03/2010 for the course BUSINESS econ203 taught by Professor Shivaggo during the Spring '10 term at Columbia College.

Page1 / 3

Body Panel Construction - CN-2 BODY PANEL CONSTRUCTION...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online