SpecialProblems8-10

# SpecialProblems8-10 - in the cycle. (d) What is the heat...

This preview shows page 1. Sign up to view the full content.

Special Problems for ME 200 – Fall 2009 Special Problems 8, 9, & 10 Due Friday, September 18, 2009 SP8: 0.5 kg of air, contained inside a piston-cylinder device, with an initial pressure of 5 bar and initial volume of 0.1 m 3 undergoes a thermodynamic cycle consisting three processes as follows: Process 1-2: 100 kJ of heat is added to the device in an isobaric manner during which the internal energy increases by 20 kJ Process 2-3: Air cools at constant volume and the internal energy decreases by 50 kJ Process 3-1: Compression of air via a polytropic process (PV 1.3 = constant). (a) Draw the cycle on a P-V diagram. (b) What is the pressure (bar) and volume (m 3 ) at states 2 and 3? (c) Find the heat transfer (kJ), work (kJ), and internal energy change (kJ) for each process
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: in the cycle. (d) What is the heat transfer (kJ) and work (kJ) for this cycle? SP9: A heat pump has coefficient of performance of 3. The rate of heat transfer from the heat pump cycle is 300 kW. The heat pump cycle is operated by a power cycle. The rate of heat transfer into the power cycle is 250 kW. (a) What is the thermal efficiency (%) of the power cycle? (b) Determine the amount of heat (kW) received by the heat pump cycle. SP10: A 0.5 m 3 rigid vessel initially contains a saturated liquid-vapor mixture of water at 100 C. The water is heated until it reaches its critical point. (a) Indicate the process on a P-v diagram, (b) What is the mass of liquid water (kg) at the initial state? (c) Determine the volume occupied by vapor (m 3 ) at the initial state....
View Full Document

Ask a homework question - tutors are online