3Gear_Train

# 3Gear_Train - Gear Train Gear Train Weidong Guo, Mileta M...

This preview shows pages 1–8. Sign up to view the full content.

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Gear Train Gear Train Weidong Guo, Mileta M Tomovic School of Technology Mechanical Engineering Technology Estimated time required : ~60 min • Creating a new database file • Creating gear train model Creating gears in Solidworks Input the gears from Solidworks Creating gear train model • Simulating model • Measuring model • Editing measure plot Topics Covered Topics Covered Problem Description Problem Description In the planetary gear train shown, the tooth numbers of two gears are z 1 =40, z 2 =20, and the module of the gears is m=5mm. The sun gear is fixed to the ground. The driving link is arm, and its angular velocity is ω H =30deg/s. This problem asks for the angular velocity of planet gear relative to the arm. Planet gear Sun gear Arm Creating Gears reating Gears b d c a In this tutorial, we will use Solidworks to create gears (begin from next page). If you do not have such kind of software, you can create Cylinders to simulate the gears. a . Select Cylinder tool. b . Create big cylinder to simulate planet gear. c . Create small cylinder to simulate sun gear. d . Rotate two gears 90 ° about y axial. Note! Before rotating the gears, make sure the gears are selected. Note! You should continue this tutorial from P.20 if you use cylinders to simulate the gears. Creating Gears reating Gears a. Start Solidworks . b. Create a New document . c. Select Part document. d. Select OK . Creating Sun Gear Creating Sun Gear c d b a Note! If you do not have solid creating software, you can create cylinders in Adams to express the gears. a. Click Design Library button. b. Select Toolbox/Ansi Metric/Power Transmissior/Gears. c. Right-check Spur Gear icon. d. Select Create Part… . e. In Spur Gear dialog box, enter parameters of the sun gear. f. Select OK . The sun gear is created as shown. Creating Sun Gear Creating Sun Gear d a b c e f Creating Gears reating Gears a. Select File/Save AS from the drop down menu. b. Select or create a folder for Save in . c. Select Parasolid (*.x_t) in Save as type text field. d. In File name text field, enter Sun Gear . e. Select Save ....
View Full Document

## This note was uploaded on 05/24/2010 for the course MEC 7658h taught by Professor Madder during the Spring '10 term at Punjab Engineering College.

### Page1 / 35

3Gear_Train - Gear Train Gear Train Weidong Guo, Mileta M...

This preview shows document pages 1 - 8. Sign up to view the full document.

View Full Document
Ask a homework question - tutors are online