TAM212sampleexam3

# TAM212sampleexam3 - Point C moves at a constant speed of 34...

This preview shows page 1. Sign up to view the full content.

TAM 212 Sample Exam no. 3 Oct 25, 2004 1] Disk D with attached pin P located 10 inches from the center C of the disk rotates at a constant speed of 3 radians/second in the clockwise direction. Pin C is fixed. Triangularly shaped slotted body T is pinned at O; the pin P slides in the slot. Find the angular velocity and angular acceleration of T in the diagrammed position (in which the slot lies at an 45 degree angle to the horizontal.) Remember to indicate the sense of these quantities. 2] The two links S and R are pinned at A. (See figure below)
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Point C moves at a constant speed of 34 m/sec towards the upper right in the circular track of radius 17m. Find the angular velocity and angular acceleration of rod R . Point O is fixed. Remember to indicate the sense of and . 3] The balls in the ball-bearing assembly roll without slipping on both the shaft and the housing. Find the velocity and acceleration of the point C at the center of the top Ball. The housing is at rest, and th1 shaft is rotating at constant rate =3rad/sec clockwise; R=3 cm; r = 1cm....
View Full Document

## This note was uploaded on 05/24/2010 for the course TM 212 taught by Professor Richard during the Spring '10 term at University of Illinois, Urbana Champaign.

Ask a homework question - tutors are online