1402054378

# 13 and the standard deviation increases of 086 in

This preview shows page 1. Sign up to view the full content.

This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: on the primary datum symmetrically with respect to the X-coordinate of the pattern barycentre and as far as possible, while placing the locator on the secondary datum coincident with the Ycoordinate of the pattern barycentre; we call this rule barycentre method. In this case the average value of probability the pattern of holes falls inside the tolerance zone reduces of about 0.42%, while the standard deviation increases of 0.31% with respect to the optimal solution (see Table 1). A further rule taken by common sense involves to position the 2-locators on the primary datum as far as possible and, therefore, on the vertices of the primary datum; we call this rule maximum distance method. In this case the average value of probability reduces of about 1.31%, while the standard deviation increases of 0.71% with respect to Position Deviation of a Holes Pattern 207 the optimal solution. Moreover, we observed that the distance between the centres of the 2 holes along the X axis is at most eq...
View Full Document

## This note was uploaded on 08/03/2010 for the course DD 1234 taught by Professor Zczxc during the Spring '10 term at Magnolia Bible.

Ask a homework question - tutors are online