22 orientation tolerance tolerance no 2 surface gauge

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: ne. This gauge is completely free in displacement compared to the part : Figure 2; Interpretation of a form tolerance (flatness). 2.2 Orientation tolerance (tolerance No. 2): Surface-gauge - Degree of freedom of a gauge Now the tolerance zone is "dependent" in orientation on a theoretical datum surface (here a plane). This datum surface is like a perfect plane which must be fitted with the "bottom" face of the part. The orientation tolerance can be interpreted as a virtual gauge, composed of one plane (surface-gauge) and a tolerance zone (zone-gauge). The zone-gauge is linked to the plane-gauge but can move in translation in the three directions of the space. The Surfacegauge plane is fitted with the "bottom" face of the part. Then the zone-gauge can move in translation to try to contain the "top" face : Figure 3; Interpretation of an orientation tolerance (parallelism). 2.3 Position tolerance for a pattern of features (tolerance No. 3) and maximum mate...
View Full Document

This note was uploaded on 08/03/2010 for the course DD 1234 taught by Professor Zczxc during the Spring '10 term at Magnolia Bible.

Ask a homework question - tutors are online