Unformatted text preview: % elongation applied on size of uncertainty zone). It is worth noting that torsor based uncertainty models also use first order linearization for their computations.
PLM phases (inverted) Production conditions
No load Normal temperature
Analysis Clearance at assembly (no load & temperature) Operation conditions
Design requirements in operation
Requirements Clearance in operation (load & temperature) Design
Design requirements at assembly
Requirements Dimensions & clearance at assembly Load Operation temperature
Synthesis Uncertainties on parts and subassemblies Computations Compensation 1) Strains in operation 2) Nominal dimensions in operation Shifted dimension values at assembly Figure 3; Product requirements from operation to assembly conditions. Geometrical Variations Management 83 From there, compensated dimensions and uncertainties are fed to an analysis model, such as the Jacobian-torsor, therefore providing a corresponding clearance value at assembly. The uncertainti...
View Full Document
This note was uploaded on 08/03/2010 for the course DD 1234 taught by Professor Zczxc during the Spring '10 term at Magnolia Bible.
- Spring '10
- The Land