For the calibration routine the same measurement

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: echnology”; November 2004; Vol. 24; No. 9-10; pp. 647-660. [RD&T, 2002] RD&T Software Manual, RD&T Technology AB, Mölndal, Sweden, 2002. [Söderberg, 1995] Söderberg, R.; “On Functional Tolerances in Machine Design”; Machine and Vehicle Design, Chalmers University of Technology, Göteborg, Sweden, 1995; ISBN 91-7197-129-7. [Taguchi et. al., 1989] Taguchi, G.; Elsayed, E. A.; Hsiang T. C.; “Quality Engineering in Production Systems”; McGraw-Hill; 1989; ISBN 0-07-062830-0. Monitoring Coordinate Measuring Machines by User-Defined Calibrated Parts Prof. Dr.-Ing. Dr.h.c.mult. A. Weckenmann, Dr.-Ing. S. Beetz, Dipl.-Ing. J. Lorz University Erlangen-Nuremberg, Chair Quality Management and Manufacturing, Metrology, Naegelsbachstraße 25, D-91052 Erlangen weckenmann@qfm.uni-erlangen.de Abstract: Coordinate measuring machines (CMM) are essential for quality assurance and production control in modern manufacturing. Due to the necessity of assuring traceability during the use of C...
View Full Document

This note was uploaded on 08/03/2010 for the course DD 1234 taught by Professor Zczxc during the Spring '10 term at Magnolia Bible.

Ask a homework question - tutors are online