If the datum is composed by two or three geometrical

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: the cloud of measured points and the reference element of the class of revolution surfaces from which the sampling comes. The best transformation parameters are searched minimizing the distance between the cloud of measured points and a geometric element having the same geometric nature of the reference element of the class of the revolution surface. Afterwards the individuation of the best-fit set of transformation parameters, the form tolerance of the inspected feature can be assessed following the tolerance definition supplied by the GD&T Y 14.5 standard. Numerical simulations were performed in order to validate the effectiveness and the robustness of the approach. The great advantage of this new algorithm is that its formulation may be applied to assess any kind of surfaces without any adaptation effort. Keywords: profile tolerance, geometric dimensioning and tolerancing (GD&T), geometric product specification (GPS), continuous subgroups of rigid motion 1. INTRODUCTION Dimensional...
View Full Document

This note was uploaded on 08/03/2010 for the course DD 1234 taught by Professor Zczxc during the Spring '10 term at Magnolia Bible.

Ask a homework question - tutors are online