It will have the same shape as fig 5a but have a

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: in Fig. 1(b) for the rectangular face conforms with diagrams and spaces presented by others for representing size-tolerances. [Whitney, et al., 1994] obtained the shape using an intuitive argument. [Roy and Li, 1999] used inequalities to establish a variation zone of acceptable ranges of the coordinates for any plane in the tolerance-zone. [Giordano, et al., 1999, 2001] get a dipyramidal deviation space using the same method. The T-Map for an axis, such as for one of the holes in the plate of Fig. 2(a), is a 4-D solid of points. Although this solid cannot be viewed directly, it can be visualized with 3-D hypersections in which one of the four coordinates, L', M', P, and Q, is held fixed; one representative hypersection of it is shown in Fig. 2(b). (Note: In the plan (top) view of Fig. 2(a), L' and M' represent tilts of the axis to the left-or-right and fore-or-aft, respectively, and P and Q represent translations of the axis in the same directions, respectively.) The method of [Giordano, et...
View Full Document

This note was uploaded on 08/03/2010 for the course DD 1234 taught by Professor Zczxc during the Spring '10 term at Magnolia Bible.

Ask a homework question - tutors are online