This preview shows page 1. Sign up to view the full content.
Unformatted text preview: er to estimate corresponding assembly clearances from functional requirements of the product in operation.
PLM phases Production phase
Clearances (assembly) GD&T spec. Manufacturing Metrology Design phase
Requirements Identification Operation phase
Loads (flexible parts) Clearances (operation) Assembly (fastening) Temperature Modelling Tolerance zone (parts & subassemblies) Part uncertainty zone Sub-assembly uncertainty zone Part deviations Predicted clearance in operation Validation Process validation Product design validation Union operator Figure 2; Product and processes validation in a PLM perspective. 82 A. Desrochers
4. PLM TOLERANCE SYNTHESIS PROCEDURE As mentioned in the preceding section, one last important link in the proposed architecture is the one which establishes the relation between design requirements in operation and design requirements at the production phase. The proposed approach to address this issue is shown in figure 3 as a “PLM tolerance synthesis procedure”. 4.1. Description of the proposed methodology The method us...
View Full Document
This note was uploaded on 08/03/2010 for the course DD 1234 taught by Professor Zczxc during the Spring '10 term at Magnolia Bible.
- Spring '10
- The Land