P zuffante et h sakuria representing dimensions

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: product model three types of link are available: The semantic of the link between component and interface is that the interfaces belong to one component. The link between function and interface corresponds to the definition that the function links two or more interfaces. The third link between function and component corresponds to the component is a technical solution of the function. These links are instantiate as shown in Figure 2. 3. STANDARD COMPONENT DESCRIPTION We have presented how to describe a product at the first stages of the design process. In the mechanical industries, designers use numerous standard components to ensure the functions of mechanisms. Designers do not design the standard components, they only know their intrinsic characteristics (i.e. thread of a screw, clearances of a ball bearing) and the surfaces, which are used to mount the standard component (helix of a screw, cylindrical surface of the inner ring of a ball bearing). The mounting conditions of a standard c...
View Full Document

This note was uploaded on 08/03/2010 for the course DD 1234 taught by Professor Zczxc during the Spring '10 term at Magnolia Bible.

Ask a homework question - tutors are online