These two steps then are repeated for each trajectory

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: e cutting parameters. They correspond to latent information that can be extracted from the points sample and included in the derived element definition. Henke et al., [Henke et al., 1999] have integrated the first and second order defects directly in the definition of the mathematical model. They proposed to superimpose to the model of a perfect cylinder the cumulated effect of most classical machining defects (conicity, filet, trilobing…). The defects are described by polynomial Fourier series and all theirs possible combinations are investigated by a special algorithm. For each combination, a maximum probability is determined and used to select the combination leading to the most consistent model. The optimum defines the best fit of the analyzed surface. Choi et al., [Choi et al., 1998] have presented an alternative approach of the problem that does not require cataloging all the different kinds of defects. They used a beta distribution to reproduce the repartition of the distances...
View Full Document

This note was uploaded on 08/03/2010 for the course DD 1234 taught by Professor Zczxc during the Spring '10 term at Magnolia Bible.

Ask a homework question - tutors are online