Unformatted text preview: ng, Tempe (US), 10-11 April 2005 [Villeneuve et al., 2001] Villeneuve, F.; Legoff, O.; Landon, Y.; “Tolerancing for manufacturing: a three dimensional model”; International Journal of Production Research, Vol. 39, N°8; pp. 1625-1648, 2001 [Villeneuve et al., 2004] Villeneuve F., Vignat F.: “Manufacturing process simulation for tolerance analysis and synthesis”, in: CD Proceedings of IDMME 04, Bath (UK), 5-7 April 2004 This page intentionally blank Surface Best Fit: Generated Distribution of the Real Manufacturing Process
S. Aranda*, J. M. Linares *, J. M. Sprauel*, P. Bourdet** * EA(MS)2, I.U.T., Avenue Gaston Berger - F13625 Aix en Provence cedex 1 ** LURPA, ENS Cachan, Avenue du président Wilson - F94230 Cachan [email protected] Abstract: In the last seminar of the CIRP, a new concept based on a statistical approach has been presented. It allows evaluating the uncertainties of Coordinate Measuring Machine measurements, accounting for the measuring process. The implication of these evaluated uncertainties in the verification of specifications has been also discussed and the example of a coaxiality specification has...
View Full Document
This note was uploaded on 08/03/2010 for the course DD 1234 taught by Professor Zczxc during the Spring '10 term at Magnolia Bible.
- Spring '10
- The Land