lab2 - Lab 1.3.3 Troubleshooting a Small Network Topology...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon
Lab 1.3.3: Troubleshooting a Small Network Topology Diagram Learning Objectives Upon completion of this lab, you will be able to: Verify that a paper design meets stated network requirements Cable a network according to the topology diagram Erase the startup configuration and reload a router to the default state Load the routers with supplied scripts Discover where communication is not possible Gather information about the misconfigured portion of the network along with any other errors Analyze information to determine why communication is not possible Propose solutions to network errors Implement solutions to network errors Scenario In this lab, you are given a completed configuration for a small routed network. The configuration contains design and configuration errors that conflict with stated requirements and prevent end-to-end communication. You will examine the given design and identify and correct any design errors. You will then cable the network, configure the hosts, and load configurations onto the router. Finally, you will troubleshoot the connectivity problems to determine where the errors are occurring and correct them All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 5
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
CCNA Exploration LAN Switching and Wireless: LAN Design Lab 1.3.3: Troubleshooting a Small Network using the appropriate commands. When all errors have been corrected, each host should be able to communicate with all other configured network elements and with the other host. Task 1: Examine the Logical LAN Topology The IP address block of 172.16.30.0 /23 is subnetted to meet the following requirements: Subnet Number of Hosts Subnet A 174 Subnet B 60 Additional requirements and specifications: The 0 subnet is used. The smallest possible number of subnets that satisfy the requirements for hosts should be used, keeping the largest possible block in reserve for future use. Assign the first usable subnet to Subnet A.
Background image of page 2
Image of page 3
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 08/27/2010 for the course IDS 01 taught by Professor J.praxton during the Spring '10 term at Messenger.

Page1 / 5

lab2 - Lab 1.3.3 Troubleshooting a Small Network Topology...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online