PSPICEhandout2

PSPICEhandout2 - Dependent sources: Voltage-controlled or...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Voltage-controlled or current-controlled dependent sources can be found in the analog library (analog.olb). They are labeled: E Voltage-controlled voltage source F Current-controlled current source G Voltage-controlled current source H Current-controlled voltage source The connections on the right hand side of each component, which are connected to the circle inside, are the source outputs and the connections on the left are used to measure the controlling voltage or current, as shown in Fig. 1 for a voltage-controlled voltage source. How to set the gain, the ratio of the output voltage or current to the input voltage current, is explained later in this handout. Fig. 1. A voltage controlled voltage source. The reference voltage connections of a voltage-controlled voltage source should be connected in parallel with the component across which the controlling voltage is defined. Fig. 2 shows an example for a voltage-controlled voltage source.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 08/31/2010 for the course EECS 70a taught by Professor Staff during the Winter '08 term at UC Irvine.

Page1 / 5

PSPICEhandout2 - Dependent sources: Voltage-controlled or...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online