HW_110 - flows at 0.025 kg/s. The other inlet (2) enters at...

This preview shows page 1. Sign up to view the full content.

HW 11 1. A small fan pulls air through a duct and across and electrical resistor where the air is heated. Given that the density of air is 1.20 kg/m 3 at the inlet and 1.05kg/m 3 at the exit, determine the percent increase in air velocity as it flows through the duct. 2. Nitrogen gas at 50°C and 200 kPa is flowing in a pipe 50-mm in diameter at 0.05kg/s. The gas encounters a partially closed valve. If there is a pressure drop of 30 kPa across the valve and assuming no temperature change, determine (a) the inlet velocity and (b) the velocity exiting the pipe after the valve. 3. Two steady flows of air enter a control volume shown below. Inlet (1) is at 350 kPa, 250°C, and
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: flows at 0.025 kg/s. The other inlet (2) enters at 450kPa and 15C. A single flow exits the control volume at 100 kPa and -40C. During the process 1kW of heat is rejected while 4kW of work is produced. What is the mass flow of the second inlet? a. 4. A 25,000 gallon pool is being filled with water (T = 90 F) by a fire hose. If the volumetric flow rate of the fire hose is 11 butts per hour, what is the mass flow rate of the water? Starting from conservation of mass and applying assumptions, how long will it take to fill the pool? 5. When analyzing steady flow systems why is it common practice to neglect the mechanical energy terms (ke and pe) ?...
View Full Document

This note was uploaded on 09/05/2010 for the course MEEN 315 taught by Professor Ramussen during the Summer '07 term at Texas A&M.

Ask a homework question - tutors are online