HW-03 - yielding if the material is 18Ni maraging steel 1791MPa Y σ = Employ(a Tresca and(b)Von Mises criterion 9 A simply supported beam has a

This preview shows page 1. Sign up to view the full content.

1 VK 250 Summer 2008 Homework 3 (Due on Friday, July 18, 2008) 1. Callister (Textbook, 7 th edition), Page 352, Question 10.2. 2. Callister (Textbook, 7 th edition), Page 352, Question 10.3. 3. Callister (Textbook, 7 th edition), Page 352, Question 10.4. 4. Callister (Textbook, 7 th edition), Page 126, Question 5.7. 5. Callister (Textbook, 7 th edition), Page 126, Question 5.11. 6. Callister (Textbook, 7 th edition), Page 304, Question 5.15. 7. Callister (Textbook, 7 th edition), Page 304, Question 5.25. 8. A pipe 10m long has closed ends, a wall thickness of 5mm, and an inner diameter of 3m, and it is filed with a gas at a pressure of 2MPa. Neglecting any localized effects of the end closure, what is the safety factor against
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: yielding if the material is 18Ni maraging steel ( 1791MPa Y σ = )? Employ (a) Tresca and (b)Von Mises criterion. 9 . A simply supported beam has a solid cylindrical cross section. The beam is of length 1.0 m and it must carry a load of 1.0 kN uniformly distributed along its length. The beam must also support a torque of 1.0 kNm. The beam must have a safety factor of two against yield by the von Mises criterion. If the beam is made of AISI 4142 steel below, what is the mass of the beam? AISI 4142 (450°C Temper) steel: ρ = 7900 kgm-3 , σ y = 1584 MPa 10. Callister (Textbook, 7 th edition), Page 205, Question 7.38....
View Full Document

This note was uploaded on 09/15/2010 for the course MATSCIE 250 taught by Professor Yalisove during the Fall '08 term at University of Michigan.

Ask a homework question - tutors are online