EE450-U5-SwitchingTechnologies_Lecture-Nazarian-Summer10

EE450-U5-SwitchingTechnologies_Lecture-Nazarian-Summer10 -...

Info iconThis preview shows pages 1–9. Sign up to view the full content.

View Full Document Right Arrow Icon
EE450 Computer Networks Switching Technologies Shahin Nazarian Summer 2010
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
Shahin Nazarian/EE450/Summer 2010 2 Switched (or Switching) Technologies
Background image of page 2
Shahin Nazarian/EE450/Summer 2010 3 Switched Network
Background image of page 3

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
Shahin Nazarian/EE450/Summer 2010 4 Circuit-Switched Network Go back to our previous discussions on how for a phone call, a dedicated circuit (per ______________ __________) is established. Note that only a portion of the trunks in the path of the dedicated circuit is used (e.g., either one frequency portion in FDM, or a time slot in TDM) Once the caller ends the phone call, all resources that had been dedicated become free 64kbps is dedicated to each phone call (Question, how many calls can be carried through a 2Gbps shared trunk?) Traffic comes in the form of ______ (such as voice, and video) or _____ , i.e., data Circuit-switched network is optimized for ______ traffic (and real time applications) & not good for ___
Background image of page 4
Shahin Nazarian/EE450/Summer 2010 5 Circuit-Switched – Delay Components
Background image of page 5

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
Shahin Nazarian/EE450/Summer 2010 6 Circuit-Switched Total Delay
Background image of page 6
Shahin Nazarian/EE450/Summer 2010 7 Circuit-Switched Total Delay – Example Suppose all the links in a circuit-switched network have a bit rate of 56Kbps. Also it takes 900msec and 200msec to establish and disconnect an end-to-end circuit respectively, before a sender host can transmit data How long does it take to send a file of 1MB from host A to host B? The propagation delay between A and B is 0.5 seconds Transmission delay = __ × 10 6 ____/____ bps =142.86 seconds Total delay = ___ + 142.86 + ____ + ____ =144.46s
Background image of page 7

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
Shahin Nazarian/EE450/Summer 2010 8 Connectionless Packet-Switched In TCP and UDP (layer 4) the notions of connection-oriented and connectionless imply the handshaking process existence for TCP (and no handshaking process for UDP,) however the notion of connectionless packet switching (layer 3,) means no setup connection In circuit switching addressing is done only during ________ , and once the circuit is set up, we don’t need any addressing, because the resources are going to be dedicated However in connectionless packet switching networking, everything is shared and there is no dedicated resources, so the message is broken into packets and each packet needs to be addressed to let the router know where to send the packet. That is the reason we put the address of the source and
Background image of page 8
Image of page 9
This is the end of the preview. Sign up to access the rest of the document.

{[ snackBarMessage ]}

Page1 / 25

EE450-U5-SwitchingTechnologies_Lecture-Nazarian-Summer10 -...

This preview shows document pages 1 - 9. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online