CircuitSimulationlab - Circuit Simulation Lab Report

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Circuit Simulation Lab Report ______________________________________________________________________ ______________________________________________________________________ Simulated Value Simulated Value (Step 19) (Step 21) Current through 8.2 k resistor Current through 10 k resistor Current through 20 k resistor TA Signature (Step 22): _________________________________________________________ 0% tolerance 1% tolerance 5% tolerance Run #1 Run #2 Run #3 Run #4 Run #5 0% tolerance 1% tolerance 5% tolerance Run #1 Run #2 Run #3 Run #4 Run #5 0% tolerance 1% tolerance 5% tolerance Run #1 Run #2 Run #3 Run #4 Run #5 TA Signature (Step 28): _________________________________________________________ 4.3 V Source Voltage 4.3 V Source Current Supply Voltage Diode Diode Value (V) Voltage (V) Current (mA) Plot the I-V characteristics of the diode using the data from Table 4. You should either do a **CLEAR** plot by hand or use a program like EXCEL and paste the results in the space provided below. Can you use a zener diode to replace a voltage source in a circuit? If so, how well does it match the operation of an ideal voltage source? ...
View Full Document

This note was uploaded on 09/29/2010 for the course EE 302 taught by Professor Mccann during the Fall '06 term at University of Texas at Austin.

Ask a homework question - tutors are online