This preview shows pages 1–2. Sign up to view the full content.
This preview has intentionally blurred sections. Sign up to view the full version.View Full Document
Unformatted text preview: 3) Problem 11.17, p 257 Referring to Figs 11.22 and 11.23, pp 249-250. Penetration is caused by liquid metal flowing into sand parts of core, cope, or drag (Fig. 11.23e) Corrective actions Possible defective consequence Reduce pouring temperature so the metal will solidify faster Cold shut and misrun due to premature solidification. Increase sand packing for denser sand Captured moisture in the sand cannot vent out easily, therefore, moisture can form porosity near the cast surface as pin holes or sand blow....
View Full Document
This note was uploaded on 10/04/2010 for the course ENTC ENTC 181 taught by Professor Hung during the Spring '09 term at Texas A&M.
- Spring '09