This preview shows pages 1–2. Sign up to view the full content.
This preview has intentionally blurred sections. Sign up to view the full version.View Full Document
Unformatted text preview: RFID Quiz Submitted by cmd5150 on 4/9/2010 7:39:14 PM Points Awarded 12 Points Missed Percentage 100% 1. Which RFID component is attached to the item to be identified. A. Tag B. Antenna C. Reader D. Bar code Points Earned: 1/1 Correct Answer: A Your Response: A 2. Identify the BEST decision related to product tagging. (Note: you are tagging a case of shaving cream cans. The case dimensions is 12 inches high, 12 inches wide, and 24 inches in length. A. Tag package short side B. Tag package top C. Tag a long side of package 12 inches from the left edge D. Horizontal tag orientation E. Tag a long side of package 18 inches from the left edge. Vertical tag orientation attains the best read, so horizontal is not correct. The tag should be on the long side of the package, which will orient the package on a conveyor such that the long sides are facing the outside of the conveyor where the RFID antennas will be located. Finally, the article in the ANGEL RFID folder states that the tag should be offset from center so that you do not have tag &quot;shadowing&quot; which limits that tags readability. If the tags are 12 inches in from a 24 inch long side, they will be directly in the center of the box. When two boxes are placed side-by-side, the tags will be directly over the top of each otherdirectly in the center of the box....
View Full Document
This note was uploaded on 10/10/2010 for the course SCM 460 taught by Professor Dewolf,frankwill during the Spring '10 term at Pennsylvania State University, University Park.
- Spring '10