Rice DSP Lab Setup

Rice DSP Lab Setup - Connexions module: m10871 1 Rice DSP...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Connexions module: m10871 1 Rice DSP Lab Setup * Hyeokho Choi This work is produced by The Connexions Project and licensed under the Creative Commons Attribution License Abstract The intent of this module is to describe the laboratory equipment and hardware setup at Rice Uni- versity DSP Laboratory. 1 Laboratory Equipment Each lab PC is equipped with a Texas Instrument TMS320C6211 DSK board. The DSK board is hooked to the parallel port of the PC running Windows 2000; the PC can control the DSK via the development environment called Code Composer Studio (CCS) developed by Texas Instrument. Currently we use CCS version 2.1. If you have your owlnet account, create the Samba password to log in to the machines. If you don't have an owlnet account, the TA will give you a username and password for local log in. For analog signal input and output, the DSK board has a PCM3003 codec daughtercard mounted on the board. This board provides 16 bit stereo analog input and output channels at maximum sampling rate ofboard....
View Full Document

This note was uploaded on 10/16/2010 for the course ECE 380 taught by Professor Baltazar during the Spring '10 term at Rice.

Page1 / 2

Rice DSP Lab Setup - Connexions module: m10871 1 Rice DSP...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online