14 - Appendix C - TC 9-524 APPENDIX C FORMULAS SINE BAR OR...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: TC 9-524 APPENDIX C FORMULAS SINE BAR OR SINE PLATESETTING Sine bars or sine plates usually have a length of 5 inches or 10 inches. These standard lengths are commonly used by the tool maker or inspector. The sine bar or sine plate is used for accurately setting up work for machining or for inspection. Gage blocks are usually used for establishing the height. Rule for determ ining the height of the sine bar setting for a given angle: multiply the sine of the angle by the length of the sine bar. The sine of the angle is taken from the tables of trigonometric functions. Problem: What would be the height to set a sine bar for establishing an angle of 230 41? Solution: The sine of 2341 is 0.40168. Multiply this by 5 because a 5-inch sine bar is used; 5 x 0.40168 = 2.0084, which is the height to set the sine bar. TO FIND Taper per inch Taper per foot Taper per foot Diameter at small end in inches Diameter at large end in inches Distance between two given diameters in inches Amount of taper in a certain...
View Full Document

Page1 / 4

14 - Appendix C - TC 9-524 APPENDIX C FORMULAS SINE BAR OR...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online