Symet_parts_bundle

Symet_parts_bundle - Take your time and be careful, and...

Info iconThis preview shows pages 1–4. Sign up to view the full content.

View Full Document Right Arrow Icon
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Background image of page 2
Background image of page 3

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
2N3904 Transistor 2 90° Up 90° to the Side Bend the right side lead 90° up, so it points at you. Bend the left side lead 90° to the left side. 2N 3904 2N3906 Transistor 1 90° Up 90° to the Side Bend the centre lead of the 2N3906 up at a 90° angle, and the left lead 90° to the left side. 3906 Transistor Assembly 5 =Solder point 2.2k resistor Solder the middle lead of the 2N3904 to the right lead of the 2N3906 with about 5mm (3/8") overlap. Solder the resistor across the two vertical legs, and trim the excess off. Identify Flashing LED Legs 3 The shorter leg (nearest) the flat spot) is the negative lead. Remember this! Note the Flat spot Copyright © Solarbotics Ltd, 2004 Parts List: ! PN3904 Transistor ! PN3906 Transistor ! 2.2k Resistor ! Flashing LED ! 0.1μF Capacitor ! Heat-shrink tubing ! Motor ! 3V+ Solar cell Take your time and be careful, and you’ll end up with a functional free-form solarengine. Try to stretch the heat-shrink tubing a bit so you can slip it
Background image of page 4
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 4

Symet_parts_bundle - Take your time and be careful, and...

This preview shows document pages 1 - 4. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online