151-T1 Manual Addendum rev 2

151-T1 Manual Addendum rev 2 - Manual Addendum PHY-151-T1...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Manual Addendum PHY-151-T1 Specific Heat of Metals On occasion, it will be necessary to deviate from what has been set forth in the lab manual due to changes in equipment, or discovering a better way of doing things. This addendum represents changes that have taken place between now and when the manual was written, therefore the information here supersedes that in the lab manual. In the event that the addendum is blank on a particular section of the manual, follow the manual. VI: For the Report 1: For each sample, you should plot resistance vs. time. Make sure your plot takes up as much room in the plot area as possible to allow for more precise reading of the resistances on the Y axis. Printing your plot in “Landscape” and allowing it to take an entire page will also give you greater precision. Using the construction method and the interpolation method described in the manual and the TA presentation, determine your initial and final temperatures and the specific heat of each sample. You must show your algebraic solution to eqt. 3 and at least one example
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 11/09/2010 for the course PHY 35345 taught by Professor Aa during the Fall '10 term at SUNY Buffalo.

Page1 / 2

151-T1 Manual Addendum rev 2 - Manual Addendum PHY-151-T1...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online