EML2322L-Electric Motors and Drives

EML2322L-Electric Motors and Drives - EML 2322L - MAE...

Info iconThis preview shows pages 1–4. Sign up to view the full content.

View Full Document Right Arrow Icon
EML 2322L -- MAE Design and Manufacturing Laboratory Electric Motors and Drives To calculate the peak power and torque produced by an electric motor, you will need to know the following: Motor supply voltage, V s [V] Peak motor current, I s [amps] Peak motor velocity, N [rpm] The power produced by the motor can be calculated as: P [watts] = V s [volts] * I s [amps] (Eq. 1) Converting power to units of horsepower: P [hp] = P [watts]* 0.001341 [hp/watt] (Eq. 2) Since power is equal to work divided by time , we can use the definition of horsepower to calculate the torque produced by the motor: 1 [hp] = 550 [lb-ft/s] = 33,000 [lb-ft/min] (Eq. 3) Now let’s select a motor to work with as an example. Going to the course homepage; Parts Description link (or Suppliers/Resources link and finding the motor on the vendor’s site): http://www.mae.ufl.edu/designlab/main.htm We will select one of the DC right angle gear motors we have in the lab. http://www.surpluscenter.com/item.asp?UID=2004061505500522&item=5- 1367&catname=electric
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
44 RPM 12/24 VDC 1/70 HP ENTSTORT GEARMOTOR • RPM 44 at 12 VDC no load • Voltage 12/24 DC • Amps 1-1/2 no load • Reversible • Duty continuous • Shaft 10 mm x 1 1/4" with 8 mm threaded end • Mount 3 bolt on 2" B.C. • Size 6 3/4" x 2 5/8" x 4" From the basic equations presented above: P = 12 V * 1.5 A = 18 W = 0.024 hp Comparing this value to the rate power of the motor (1/70 = 0.014 hp ), we see the actual power produced is substantially less than the computed electrical power. This is due to the electrical efficiency of the motor. This efficiency will be denoted by η motor and for the purpose of this course, we will assume the following: η motor 60% Now the power can be more accurately computed as follows: P = V * I * η motor = 12 V * 1.5 A * 0.6 = 10.8 W = 0.014 hp Using the definition of hp (Eq. 3): 0.024 hp = 7.9 ft-lb/s = 95.0 in-lb/s Therefore, this motor should be able to lift a 7.9 lb load at the rate of 1 foot per second. This is equivalent to lifting a 1 lb load at 7.9 feet per second. Note the difference is you trade torque for speed or vice versa. Looking at it in units of in-lb instead of ft-lb, this motor should be able to lift a 95 lb load at the rate of 1 inch per second. This is the same as lifting a 1 lb load at 95 inches per second.
Background image of page 2
Suppose we wish to calculate the velocity of our robot if we consider using these motors to power our drive wheels. First, we need to select a wheel diameter. Returning to the links presented above, let’s arbitrarily select an 8” diameter wheel to get a baseline.
Background image of page 3

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 4
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 10

EML2322L-Electric Motors and Drives - EML 2322L - MAE...

This preview shows document pages 1 - 4. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online