testing - Mercury QuickTest Professional Tutorial Version...

Info iconThis preview shows pages 1–5. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Mercury QuickTest Professional Tutorial Version 9.0 Mercury QuickTest Professional Tutorial, Version 9.0 This manual, and the accompanying software and other documentation, is protected by U.S. and international copyright laws, and may be used only in accordance with the accompanying license agreement. Features of the software, and of other products and services of Mercury Interactive Corporation, may be covered by one or more of the following patents: United States: 5,511,185; 5,657,438; 5,701,139; 5,870,559; 5,958,008; 5,974,572; 6,137,782; 6,138,157; 6,144,962; 6,205,122; 6,237,006; 6,341,310; 6,360,332, 6,449,739; 6,470,383; 6,477,483; 6,549,944; 6,560,564; 6,564,342; 6,587,969; 6,631,408; 6,631,411; 6,633,912; 6,694,288; 6,738,813; 6,738,933; 6,754,701; 6,792,460 and 6,810,494. Australia: 763468 and 762554. Other patents pending. All rights reserved. Mercury, Mercury Interactive, the Mercury logo, the Mercury Interactive logo, LoadRunner, WinRunner, SiteScope and TestDirector are trademarks of Mercury Interactive Corporation and may be registered in certain jurisdictions. The absence of a trademark from this list does not constitute a waiver of Mercury's intellectual property rights concerning that trademark. All other company, brand and product names may be trademarks or registered trademarks of their respective holders. Mercury disclaims any responsibility for specifying which marks are owned by which companies or which organizations. Mercury Interactive Corporation 379 North Whisman Road Mountain View, CA 94043 Tel: (650) 603-5200 Toll Free: (800) TEST-911 Customer Support: (877) TEST-HLP Fax: (650) 603-5300 1992 - 2006 Mercury Interactive Corporation, All rights reserved If you have any comments or suggestions regarding this document, please send them via e-mail to documentation@mercury.com. QTPTUT9.0/01 Table of Contents Welcome to the QuickTest Tutorial ................................................. v Using This Tutorial ..................................................................................vi Typographical Conventions ................................................................vii Lesson 1: Introducing QuickTest ..........................................................1 Benefits of Automated Testing .............................................................1 Testing Process................................................................................................2 QuickTest Window ...................................................................................4 Mercury Tours Sample Web Site ..........................................................9 Lesson 2: Recording Tests ......................................................................11 Preparing to Record a Test ....................................................................11 Recording a Test .........................................................................................12 Analyzing the Test in the Keyword View ...................................17 Lesson 3: Running and Analyzing Tests..........................................21 Running a Test.............................................................................................21 Analyzing Test Results .............................................................................23 Lesson 4: Creating Checkpoints ..........................................................27 Understanding Checkpoint Types ...................................................28 Checking Objects ...................................................................................29 Checking Pages ............................................................................................33 Checking Text .........................................................................................35 Checking Tables .........................................................................................37 Running and Analyzing a Test with Checkpoints ..................40 Lesson 5: Parameterizing Tests ...........................................................47 Defining a Data Table Parameter ......................................................48 Adding Parameter Values to a Data Table ....................................50 Modifying Steps Affected by Parameterization .........................51 Running and Analyzing a Parameterized Test ............................53 iii Table of Contents Lesson 6: Creating Output Values......................................................57 Creating an Output Value .................................................................57 Running and Analyzing a Test with Output Values ...............63 Lesson 7: Using Regular Expressions ................................................65 Regular Expression Syntax ....................................................................65 Working with Regular Expressions .................................................66 Running and Analyzing a Test with Regular Expressions.... ..69 Lesson 8: Dividing Tests into Multiple Actions .........................71 Working with Multiple Actions ....................................................71 Creating New Actions............................................................................72 Inserting Existing Actions ..................................................................81 Parameterizing an Action ......................................................................87 Running and Analyzing a Multi-action Test...............................91 Lesson 9: Where Do You Go from Here? .......................................93 Testing Your Own Application--Getting Started .....................93 Getting Additional Information ...................................................95 Documentation Updates .....................................................................98 Index ................................................................................................................99 iv Welcome to the QuickTest Tutorial Welcome to the QuickTest tutorial. The tutorial is a self-paced guide that teaches you the basics of testing your application with QuickTest, Mercury's powerful functional testing tool. QuickTest enables you to test standard Windows, Web, ActiveX, and Visual Basic controls. This tutorial will familiarize you with the process of creating and running automated tests and analyzing the test results. Note: In addition to tests, QuickTest enables you to create business components for use in business process tests, if you have Quality Center with Business Process Testing support installed. The procedures described in this tutorial are designed for creating tests, but you can also apply the majority of these procedures to creating business components. For more information on business components and Business Process Testing, refer to the Mercury QuickTest Professional for Business Process Testing User's Guide and the Mercury Business Process Testing User's Guide. This introduction describes: Using This Tutorial Typographical Conventions v Welcome Using This Tutorial The tutorial is divided into nine short lessons. In each lesson you will create and run tests on the sample Mercury Tours Web site. After completing the tutorial, you can apply the skills you have learned to your own Web site. Lesson manual process and the 1, Introducing QuickTest compares automated and testing methods. It introduces the QuickTest testing and familiarizes you with the QuickTest user interface sample Mercury Tours Web site. Lesson 2, Recording Tests teaches you how to record a test and provides an overview of the resulting Keyword View display. Lesson 3, Running and Analyzing Tests shows you how to run a test and view the test results. Lesson 4, Creating Checkpoints explains how to add checkpoints to your test to verify that information in your Web site is displayed as expected. Lesson 5, Parameterizing Tests shows you how to parameterize your test so that you can run it on multiple sets of data. Lesson 6, Creating Output Values teaches you how to use output parameters to retrieve data from your Web site. Lesson 7, Using Regular Expressions teaches you how to create and run a test using regular expressions. Lesson 8, Dividing Tests into Multiple Actions explains how to divide your test into actions so that you can design more efficient and modular tests. Lesson 9, Where Do You Go from Here? shows you how to get started testing your own application and tells you where you can find more information about QuickTest. vi Welcome Typographical Conventions This book uses the following typographical conventions: 1, 2, 3 Bold numbers indicate steps in a procedure. Bullets indicate options and features. The greater than sign separates menu levels (for example, File > Open). The Stone Sans font indicates names of interface elements (for example, the Run button) and other items that require emphasis. Bold text indicates method or function names. Italic text indicates method or function arguments, names in syntax descriptions, and book titles. > Stone Sans Bold Italics file <> Angle brackets enclose a part of a file path or URL address that may vary from user to user (for example, <MyProduct installation folder>\bin). The Arial font is used for examples and text that is to be typed literally. The Arial bold font is used in syntax descriptions for text that should be typed literally. In a line of syntax, an ellipsis indicates that more items of the same format may be included. In a programming example, an ellipsis is used to indicate lines of a program that were intentionally omitted. Arial Arial bold [ ] | Square brackets enclose optional arguments. A vertical bar indicates that one of the options separated by the bar should be selected. vii Welcome viii 1 Introducing QuickTest In this lesson you will learn about the: Testing Benefits of Automated Testing Process QuickTest Window Mercury Tours Sample Web Site Benefits of Automated Testing If you have ever tested applications or Web sites manually, you are aware of the drawbacks. Manual testing is time-consuming and tedious, requiring a heavy investment in human resources. Worst of all, time constraints often make it impossible to manually test every feature thoroughly before the application is released. This leaves you wondering whether serious bugs have gone undetected. Automated testing with QuickTest addresses these problems by dramatically speeding up the testing process. You can create tests that check all aspects of your application or Web site, and then run these tests every time your site or application changes. 1 Lesson 1 Introducing QuickTest As QuickTest runs tests, it simulates a human user by moving the cursor in a Web page or application window, clicking GUI (graphical user interface) objects, and entering keyboard input; however, QuickTest does this faster than any human user. Benefits of Automated Testing Fast Reliable Repeatable Programmable Comprehensive Reusable QuickTest runs tests significantly faster than human users. Tests perform precisely the same operations each time they are run, thereby eliminating human error. You can test how the Web site or application reacts after repeated execution of the same operations. You can program sophisticated bring out hidden information. tests that You can build a suite of tests that covers every feature in your Web site or application. You can reuse tests on different versions of a Web site or application, even if the user interface changes. Testing Process The QuickTest testing process consists of seven main phases: 1 Preparing to record Before you record a test, confirm that your application and QuickTest are set to match the needs of your test. Make sure your application displays elements on which you want to record, such as a toolbar or a special window pane, for example, and that your application options are set as you expect for the purposes of your test. 2 Recording a session on your application As you navigate through your application or Web site, QuickTest graphically displays each step you perform as a row in the Keyword View. A step is any user action that causes or makes a change in your application, such as clicking a link or image, or entering data in a form. 2 Lesson 1 Introducing QuickTest 3 Enhancing your test Inserting checkpoints into your test lets you search for a specific value of a page, object, or text string, which helps you determine whether your application or site is functioning correctly. Broadening the scope of your test, by replacing fixed values with parameters, lets you check how your application performs the same operations with multiple sets of data. Adding logic and conditional or loop statements enables you to add sophisticated checks to your test. 4 Debugging your test You debug a test to ensure that it operates smoothly and without interruption. 5 Running your test You run a test to check the behavior of your application or Web site. While running, QuickTest opens the application, or connects to the Web site, and performs each step in your test. 6 Analyzing the test results You examine the test results to pinpoint defects in your application. 7 Reporting defects If you have Quality Center installed, you can report the defects you discover to a database. Quality Center is Mercury's software test management tool. 3 Lesson 1 Introducing QuickTest QuickTest Window Before you begin creating tests, you yourself with the main QuickTest window. should familiarize The image below shows a QuickTest window as it would appear after you record a test, with all toolbars and the Data Table and Active Screen panes displayed: Title Bar Menu Bar Toolbars Test Pane Data Table Active Screen Status Bar 4 Lesson 1 Introducing QuickTest The QuickTest window contains the following key elements: Title bar--Displays the name of the currently open test. Menu bar--Displays menus of QuickTest commands. Standard toolbar--Contains buttons to assist you in managing your test. New <document> Object Repository Enable Editing Save Print Copy Open Save All <document> Cut Paste Settings Quality Center Connection Automation toolbar--Contains buttons to assist you in the testing process. Analog Recording Record Stop Results Run Low Level Recording Update Run Mode 5 Lesson 1 Introducing QuickTest Debug toolbar--Contains buttons to assist you in debugging tests. Step Over Pause Enable/Disable All Breakpoints Insert/Remove Breakpoint Step Into Clear All Breakpoints Step Out Note: The Debug toolbar is not displayed when you open QuickTest for the first time. You can display the Debug toolbar by choosing View > Toolbars > Debug, or by clicking the Debug Viewer button. This tutorial does not describe how to debug a test. For additional information, refer to the Mercury QuickTest Professional User's Guide. Edit toolbar--Contains buttons to assist you in editing your test steps. Comment Block Find Undo Indent Go To Redo Outdent Uncomment Replace Block Insert toolbar--Contains buttons to assist you in inserting steps, actions, checkpoints, and output values into your test. 6 Lesson 1 Introducing QuickTest Tools toolbar--Contains buttons to assist you in setting options, checking syntax, and working with the Object Spy. Object Options Spy Check Syntax View toolbar--Contains buttons to view the various panes that can assist you in the testing process. Debug Viewer Active Missing Screen Resources Data Table Information Pane Action toolbar--Contains buttons and a list of actions, enabling you to view the details of an individual action or the entire test flow. Action List Display selected action Back Note: The Action toolbar is displayed only in the Keyword View. It is not displayed when you open QuickTest for the first time. You can display the Action toolbar by choosing View > Toolbars > Action. If you insert a reusable or external action in a test, the Action toolbar is displayed automatically in the Keyword View. For additional information, refer to the Mercury QuickTest Professional User's Guide. 7 Lesson 1 Introducing QuickTest Test pane--Contains the Keyword View and Expert View tabs. Active Screen--Provides a snapshot of your application as it appeared when you performed a certain step during the recording session. Data Table--Assists you in parameterizing your test. Debug Viewer pane--Assists you in debugging your test. The Debug Viewer pane contains the Watch, Variables, and Command tabs. (The Debug Viewer pane is not displayed when you open QuickTest for the first time. You can display the Debug Viewer by choosing View > Debug Viewer, or by clicking the Debug Viewer button.) Information pane--Displays a list of syntax errors found in your test. Missing Resources pane--Provides a list of the resources that are specified in your test but cannot be found, such as unmapped shared object repositories and parameters that are connected to shared object repositories. (The Missing Resources pane is not displayed when you open QuickTest for the first time. You can display the Missing Resources pane by choosing View > Missing Resources, or by clicking the Missing Resources button.) Status bar--Displays the status of the QuickTest application. Some of the panes and toolbar options listed above are described in detail in subsequent lessons. For information on other panes and toolbar options, refer to the Mercury QuickTest Professional User's Guide. You can also execute many menu commands using shortcut keys. For additional information, refer to the "QuickTest at a Glance" chapter in the Mercury QuickTest Professional User's Guide. Now that you are familiar with the main QuickTest window, take a few minutes to explore its components. 8 Lesson 1 Introducing QuickTest Mercury Tours Sample Web Site Mercury Tours is the sample Web application used throughout this tutorial. It simulates a Web-based flight information and reservation service. You should familiarize yourself with this application before starting the tutorial. Optimizing Browser Settings for Your Test If you are using Internet Explorer as your browser, you should clear the option to use AutoComplete for user names and passwords for the purposes of this tutorial. This ensures that all of your operations are accurately recorded while creating your tests. To clear the AutoComplete option: 1 In your Internet Explorer's menu bar, choose Tools > Internet Options > Content tab. 2 Click AutoComplete in the Personal information area. The AutoComplete Settings dialog box opens. 3 In the Use AutoComplete for area, clear the User names and passwords on forms option. 4 Click OK to save your changes and close the AutoComplete Settings dialog box, then click OK again to close the Internet Options dialog box. Using the Mercury Tours Web Site for the First Time Before you begin recording your tests on the Mercury Tours Web site, you must register as a user. To run Mercury Tours: 1 Launch the Mercury Tours application. In your Web browser, type the following URL: http://newtours.mercury.com The Mercury Tours home page opens. 9 Lesson 1 Introducing QuickTest 2 Register with Mercury Tours. To log-in and use the Mercury Tours application, you must be a registered user. From the home page, click the REGISTER navigation link. The Register page opens. In the User Information section at the bottom of the page, enter any user name and password, and confirm your password. (Other information is not required.) Click SUBMIT. Mercury Tours confirms your registration. From this confirmation page, click the sign-in navigation link to enter the application. The SIGN-ON page opens. Enter your registered user name and password, and click SUBMIT. The Flight Finder page opens. 3 Explore the Mercury Tours site. Beginning with the Flight Finder page, follow the on-screen instructions to get flight information and reserve a flight. On the Book a Flight page, you do not have to fill out actual personal or credit card information; just enter the required information (indicated by red) in the Passengers and Credit Card sections. (You may enter fictitious information.) 4 End your Mercury Tours session. When you are done exploring the Mercury Tours application, click the LOG OUT button on the Flight Confirmation page or the SIGNOFF link at the top of any application page. To sign-in again, simply enter your registered user name and password in the Sign-on page or in the Mercury Tours home page. 5 Close the Web browser. You are now ready to begin using this tutorial to create tests on the Mercury Tours application using QuickTest! 10 2 Recording Tests As you navigate through your Web site or application, QuickTest records your steps. These operations are the basis of your test. When you stop recording, you can see the steps of your newly-created test in a graphical format in the Keyword View. In this lesson you will learn about: Test Preparing to Record a Recording a Test Analyzing the Test in the Keyword View Preparing to Record a Test Before you begin recording a test, ensure that both your application or Web site and QuickTest are set to match the needs of your test. For the purposes of this tutorial, ensure that: You have registered as a user in the Mercury Tours Web site. For more information, see "Using the Mercury Tours Web Site for the First Time" on page 9. If you are using Internet Explorer as your browser, the AutoComplete option is cleared for user names and passwords. For instructions, see "Optimizing Browser Settings for Your Test" on page 9. All browsers are closed before you begin recording. 11 Lesson 2 Recording Tests Recording a Test In this section, you will record the process of making a reservation for a flight from New York to San Francisco on the Mercury Tours Web site. 1 Start QuickTest and open a new test. If QuickTest is not currently open, choose Start > Programs > QuickTest Professional > QuickTest Professional. In the Add-in Manager, confirm that the Web Add-in is selected, and clear all other add-ins. Click OK to close the Add-in Manager and open QuickTest. Note: While QuickTest loads your selected add-ins, the QuickTest splash screen is displayed. This may take a few seconds. If the Welcome window opens, click Blank Test. Otherwise, choose File > New > Test, or click the New button down arrow and choose Test. Tip: If a test is already open, clicking the New toolbar button opens a new test. A blank test opens. If QuickTest is already open, check which add-ins are loaded by selecting Help > About QuickTest Professional. If the Web Add-in is not loaded, you must exit and restart QuickTest. When the Add-in Manager opens, select the Web Add-in, and clear all other add-ins. Choose File > New > Test, or click the New button down arrow and choose Test. A blank test opens. 12 Lesson 2 Recording Tests Note: If the Add-in Manager does not open when starting QuickTest, choose Tools > Options. In the General tab, select Display Add-in Manager on startup. When you exit and restart QuickTest, the Add-in Manager opens. 2 Start recording on the Mercury Tours Web site. Choose Automation > Record or click the Record button. The Record and Run Settings dialog box opens. In the Web tab, select Open the following address when a record or run session begins. Confirm that the URL in the first box is http://newtours.mercury.com and in the second box, choose a browser on which to run your test session. Confirm that Do not record and run on browsers that are already open and Close the browser when the test closes are selected. 13 Lesson 2 Recording Tests In the Windows Applications tab, confirm that Record and run only on is selected, and make sure that all three check boxes are cleared. These settings prevent you from inadvertently recording operations performed on various Windows applications (such as e-mail) during a recording session. Click OK. QuickTest begins recording, and your browser opens to the Mercury Tours Web site. 3 Log in to the Mercury Tours Web site. In the User Name and Password boxes, type the name and password you registered with Mercury Tours. Click Sign-In. The Flight Finder page opens. 14 Lesson 2 Recording Tests 4 Enter flight details. Change selections: New York the following Departing From: On: Dec 29 Arriving In: San Francisco Returning: Dec 31 Service Class: Business class Click CONTINUE to accept the other default selections. The Select Flight page opens. Notes: When selecting the date, you must click on the drop-down list, scroll to any entry that is not showing, and select it. This is because QuickTest only records a step if the value in the list changes. The tutorial will not work correctly if you accept the currently displayed month or day. When entering dates while recording this test, do not click the View Calendar button, which opens a Java-based calendar. Your test will not record the date selected using this calendar because the Java Add-in is not loaded for this tutorial (The Java Add-in is an external add-in that can be purchased separately.) To check which add-ins are loaded, click Help > About QuickTest Professional. To change the available add-ins for your tests, you must close and reopen QuickTest Professional. 5 Select a flight. Click CONTINUE to accept the default flight selections. The Book a Flight page opens. 15 Lesson 2 Recording Tests 6 Enter required passenger and purchase information. Enter the required information (fields with red text labels) in the Passengers and Credit Card sections. (You may enter fictitious information.) In the Billing Address section, select Ticketless Travel. At the bottom of the page, click SECURE PURCHASE. The Flight Confirmation page opens. 7 Review and complete your booking. Click BACK TO HOME. The Mercury Tours home page opens. 8 Stop recording. In QuickTest, click Stop on the Testing toolbar to stop the recording process. You have now reserved an imaginary business class ticket from New York to San Francisco. QuickTest recorded your Web browser operations from the time you clicked the Record button until you clicked the Stop button. 9 Save your test. Choose File > Save or click the Save button. The Save dialog box opens to the Tests folder. Create a folder named Tutorial, select it, and click Open. Type Recording in the File name field. Confirm that Save Active Screen files is selected. Click Save. The test name (Recording) and path is displayed in the title bar of the main QuickTest window. Note: If a test is not yet saved, the title bar contains an asterisk. 16 Lesson 2 Recording Tests Analyzing the Test in the Keyword View As you recorded your test, QuickTest generated steps in the Keyword View representing each operation you performed in the Web browser. The columns in the Keyword View show different information for each step, as follows: Item--The item for the step (test object, utility object, function call, or statement) in a hierarchical icon-based tree. Operation--The operation to be performed on the item, for example, Click or Select. Value--The argument values for the selected operation, for example, the mouse button to use when clicking the image. Documentation--Auto-documentation of what the step does, in an easy-to-understand sentence, for example, Click the "findFlights" image. Assignment--The assignment of a value to or from a variable so you can use the value later in the test. This column is not visible by default. Comment--Any textual information you want to add regarding the step, for example, Return to page used in first step of the test. This column is not visible by default. Note: You can choose to hide or display individual columns as required, by right-clicking the column heading in the Keyword View and selecting a column name from the list. In the Item column of the Keyword View, you can click the branch arrows to expand or collapse the steps under each Web page. You can expand the entire test by choosing View > Expand All. 17 Lesson 2 Recording Tests When you expand your test, it should look similar to this: For every step performed on an object, QuickTest displays a row in the Keyword View with an icon and details of the step. For example, the step below instructs QuickTest to click the reserveFlights image at a specific location in the Select a Flight: Mercury page of the Mercury Tours Web site. 18 Lesson 2 Recording Tests The table below provides an explanation of the first few steps shown in the test in the Keyword View above. Step Description Action1 is the action name. The browser invokes the Welcome: Mercury Tours Web site. Welcome: Mercury Tours is the name of the Web page. userName is the name of the edit box. Set is the method performed on the edit box. mercury is the value of the edit box. password is the name of the edit box. SetSecure is an encryption method performed on the edit box. 4082820183afe512e8bc91c1f7222d bd is the encrypted value of the password. Sign-In is the name of the image link. Click is the method performed on the image. 2, 2 are the x- and y-coordinates where the image was clicked. Take a few minutes to examine the Keyword View in detail, tracing the steps you performed while recording your test. For more information on the Keyword View, refer to the Mercury QuickTest Professional User's Guide. 19 Lesson 2 Recording Tests 20 3 Running and Analyzing Tests When you run your test, QuickTest opens the appropriate application or Web site and performs each step as it was originally recorded in the test. When QuickTest finishes running the test, it displays the results of the run. In this lesson you will learn about: Running a Test Analyzing Test Results Running a Test In this lesson, you will run the test you recorded in the previous lesson. 1 Start QuickTest and open the Recording test. If QuickTest is not already open, choose Start > Programs > QuickTest Professional > QuickTest Professional. If the Welcome window opens, click Open Existing. If QuickTest opens without displaying the Welcome window, choose File > Open > Test or click the Open button down arrow and choose Test. In the Open Test dialog box, locate and select the Recording test, then click Open. 21 Lesson 3 Running and Analyzing Tests 2 Confirm that all images are saved to the test results. QuickTest allows you to determine when to save images to the test results. In this lesson, all images should be saved to the test results. Choose Tools the Run tab. select Always. of test result OK. > Options or click the Options button, then click In the Save step screen capture to results option, A message opens with information about the size files and performance. Read the message and click Click OK to close the Options dialog box. 3 Start running your test. Click Run or choose Automation > Run. The Run dialog box opens. Select New run results folder. Accept the default results folder name. Click OK to close the Run dialog box. Watch carefully as QuickTest opens your browser and starts running the test. In the browser, you can see QuickTest perform each step you recorded; a yellow arrow in the left margin of the Keyword View indicates the step that QuickTest is running. 22 Lesson 3 Running and Analyzing Tests Analyzing Test Results When QuickTest finishes running the test, the Test Results window opens. Results Tree Test Results Details Iteration Summary Status Summary 23 Lesson 3 Running and Analyzing Tests Initially, the Test Results window contains displaying the key elements of your test run. two panes for The left pane displays the results tree, an icon-based view of the steps that were performed while the test was running. The results tree is organized according to the Web pages visited during the test run and can be expanded (+) to view each step. The steps performed during the test run are represented by icons in the tree. You can instruct QuickTest to run a test or action more than once using different sets of data in each run. Each test run is called an iteration, and each iteration is numbered. (The test you ran had only one iteration.) The right pane displays the test results details. The iteration summary table indicates which iterations passed and which failed. The status summary table indicates the number of checkpoints or reports that passed, failed, and raised warnings during the test. Your test run succeeded because QuickTest was able to navigate the Mercury Tours site just as the test was originally recorded. In this section, you will inspect the steps QuickTest performed when running your test, and how the application window appeared when a step was performed. 24 Lesson 3 Running and Analyzing Tests 1 View the test results for a specific step. In the results tree, expand (+) Test Recording Summary > Recording Iteration 1 (Row 1) > Action1 Summary > Welcome Mercury Tours > Find a Flight. Highlight fromPort:Select in the results tree. Results Tree Test Results Details Active Image Screen The Test Results window now contains three panes, displaying: highlighted the results tree, with one step the test results details of the highlighted step the Active Screen, showing a screen capture of the Web page on which the step was performed 25 Lesson 3 Running and Analyzing Tests When you click a page in the results tree, QuickTest displays the corresponding page in the application view. When you click a step (an operation performed on an object) in the results tree, the corresponding object is highlighted in the application view. In this case, the Departing From text box is highlighted. 2 Close the Test Results window. Choose File > Exit. You have now successfully created and run a test that reserves a flight from New York to San Francisco on the Mercury Tours Web site. 26 4 Creating Checkpoints In the previous lessons, you created and ran a test checking that a series of steps performed on the Mercury Tours Web site runs smoothly. A checkpoint verifies that expected information is displayed in your application while the test is running. In this lesson you will learn about: Checkpoint Objects Understanding Types Checking Checking Pages Checking Text Checking Tables Running and Analyzing a Test with Checkpoints 27 Lesson 4 Creating Checkpoints Understanding Checkpoint Types QuickTest Professional offers the following types of checkpoints: Checkpoint Type Standard Checkpoint Image Checkpoint Table Checkpoint Page Checkpoint Text / Text Area Checkpoint Bitmap Checkpoint Database Checkpoint Accessibilit y Checkpoint Description Checks values of object's properties. an Example of Use Check that a button is selected. radio Checks the property values of an image. Checks information in a table. Checks the characteristics of a Web page. Checks that a text string is displayed in the appropriate place in a Web page or application window. Check that the image source file is correct. Check that the value in a table cell is correct. Check how long a Web page takes to load or if a Web page contains broken links. Check whether the expected text string is displayed in the expected location on a Web page or dialog box. XML Checkpoint Checks an area of a Web page or application after Check that a Web page (or capturing it as a bitmap. any portion of it) is displayed as Checks the contents of expected. databases accessed by an Check that the value application or Web in a site. database query is correct. Identifies areas of a Web site to check for Section 508 Check if the images on a compliancy. Web page include ALT properties, required by the W3C Web Checks the data Content Accessibility Guidelines. content of XML documents. Note: XML file checkpoints are used to check a specified XML file; XML application checkpoints are used to check an XML document within a Web page. 28 Lesson 4 Creating Checkpoints You can add most checkpoints to your test either while recording or afterward. The following sections explain how to create some of the checkpoints described above, in the test you created in "Recording Tests" on page 11. Note: When QuickTest creates a checkpoint, it assigns a name based on information inside the checkpoint--the checked value, for example. The checkpoint name remains unchanged, even if you subsequently modify the information on which it was based. Keep this in mind when looking for checkpoints displayed in the Keyword View. However, note that QuickTest may shorten the name displayed in the Keyword View. For more information on how to create checkpoints, refer to the Mercury QuickTest Professional User's Guide. Checking Objects In this section, you will add a standard checkpoint in the Book a Flight page. This checkpoint verifies the value in the box containing the first name of the passenger. 1 Start QuickTest and open the Recording test. If QuickTest is not already open, choose Start > Programs > QuickTest Professional > QuickTest Professional. If the Welcome window opens, click Open Existing. If QuickTest opens without displaying the Welcome window, choose File > Open > Test or click the Open button down arrow and choose Test. In the Open Test dialog box, locate and select the Recording test, then click Open. 2 Save the test as Checkpoint. Choose File > Save As. Save the test as Checkpoint. 29 Lesson 4 Creating Checkpoints 3 Confirm that the Active Screen option is enabled. If you do not see the Active Screen at the bottom of the QuickTest window, click the Active Screen button, or choose View > Active Screen. 4 Locate the page where you want to add a standard checkpoint. You want to add a checkpoint that checks the property values of the First Name edit box after the passenger's name has been entered in the box. In the Item column of the Keyword View, expand Action1 > Welcome: Mercury Tours. Highlight the Book a Flight: Mercury row. The Book a Flight page is displayed in the Active Screen and the object corresponding to the selected step is highlighted. You can see that the passenger's first name is displayed in the First Name box. 5 Create a standard checkpoint. In the Active Screen, right-click the First Name box and choose Insert Standard Checkpoint. The Object Selection - Checkpoint Properties dialog box opens. Confirm that WebEdit: passFirst0 is highlighted, and click OK. 30 Lesson 4 Creating Checkpoints The Checkpoint Properties dialog box opens. The dialog box displays the object's properties: The Name is the name of the object as defined in the HTML code of the Web page. The Class is the type of object. WebEdit indicates that the object is an edit box. The ABC icon in the Type column indicates that the value of the property is a constant. 31 Lesson 4 Creating Checkpoints For each object class, QuickTest recommends default property checks. The table below describes the default checks for the WebEdit class. Property html tag innertext Value INPUT Explanation INPUT is the html tag as defined in the HTML source code. In this case, the value of innertext is empty. The checkpoint checks that the value is empty. passFirst0 text <FirstName> (The name you entered while recording) passFirst0 is the name of the edit box. text is the type of object as defined in the HTML source code. The value entered in the edit box. name type value The passenger's first name is entered in the First Name box when the passFirst0 Set... step is performed. Therefore, in the Insert statement area of the Checkpoint Properties dialog box, select After current step. This inserts the checkpoint after the passFirst0 Set... step in which the first name is entered. In the Name box, enter CheckName as the new checkpoint name. Accept the rest of the settings as default and click OK. QuickTest adds a standard checkpoint step to your test below the selected step. 6 Save the test. Choose File > Save or click the Save button. You insert most checkpoints in the manner described above. Several special types following sections. of checkpoints are explained in the 32 Lesson 4 Creating Checkpoints Checking Pages In this section, you will add a page checkpoint to your test. The page checkpoint checks that the number of links and images in the page when you run your test is the same as when you recorded your test. 1 Locate the page where you want to add a page checkpoint. In the Item column of the Keyword View, expand Action1 > Welcome: Mercury Tours. Highlight the Book a Flight: Mercury row. The Book a Flight page is displayed in the Active Screen. 2 Create a page checkpoint. Right-click anywhere in the Active Screen, and choose Insert Standard Checkpoint. The Object Selection - Checkpoint Properties dialog box opens. This dialog box may include different elements, depending on where you click in the Active Screen. Highlight Page: Book a Flight: Mercury (the top level) and click OK. 33 Lesson 4 Creating Checkpoints The Page Checkpoint Properties dialog box opens. When you run the test, QuickTest checks the number of links and images in the page and the load time, as described in the pane at the top of the dialog box. QuickTest also checks the actual target URL of each link and the actual source of each image. In the Name box, enter CheckLinks as the new checkpoint name. Accept the rest of the settings as default and click OK. 34 Lesson 4 Creating Checkpoints QuickTest adds the page checkpoint to your test. It is displayed in the Keyword View as a checkpoint operation on the Book a Flight: Mercury page. 3 Save the test. Choose File > Save or click the Save button. Checking Text In this section, you will add a text checkpoint to your test to check whether New York is displayed in the Flight Confirmation page. 1 Locate the page where you want to add a text checkpoint. In the Keyword View, expand Action1 > Welcome: Mercury Tours. Highlight the Flight Confirmation: Mercury row. The page is displayed in the Active Screen. 2 Create a text checkpoint. In the Active Screen, under Departing, highlight the text New York (include the space after it). Right-click the highlighted text and choose Insert Text Checkpoint. 35 Lesson 4 Creating Checkpoints The Text Checkpoint Properties dialog box opens. When Checked Text appears in the list box, the Constant field displays the text string you highlighted. This is the text QuickTest looks for when running the test. In the Name box, enter CheckDepartingText as the new checkpoint name. Accept the rest of the settings as default and click OK. QuickTest adds the text checkpoint to your test. It is displayed in the Keyword View as a checkpoint operation on the Flight Confirmation: Mercury page. 3 Save the test. Choose File > Save or click the Save button. 36 Lesson 4 Creating Checkpoints Checking Tables In this section, you will add a table checkpoint to check the cost of the outbound flight, as displayed in the Book a Flight: Mercury page. 1 Locate the page where you want to add a table checkpoint. In the Keyword View, expand Welcome: Mercury Tours > Book a Flight: Mercury. Highlight the passFirst0 step (the step that enters the passenger's first name into the First Name edit box). The page is displayed in the Active Screen. 2 Create a table checkpoint. In the Active Screen, right-click the price displayed for the first flight (New York to San Francisco)--270--and choose Insert Standard Checkpoint. The Object Selection - Checkpoint Properties dialog box opens. Select WebTable: New York to San Fransisco. Note that the table you selected is highlighted in the Active Screen. Click OK. 37 Lesson 4 Creating Checkpoints The Table Checkpoint Properties dialog box opens, showing the rows and columns of the table. In the Name box, enter CheckCost as the new checkpoint name. Note that by default, check marks appear in all cells. You can double-click a cell to toggle the cell selection, or double-click a row or column header to toggle the selection for all the cells in the selected row or column. 38 Lesson 4 Creating Checkpoints Double-click each column header to clear the check marks. Double-click column 3, row 3 to check the value of this cell. (QuickTest checks only cells containing check marks.) Scroll through the rows and columns to make sure that only the cell in column 3, row 3 is checked. If any other cells are checked, select each checked cell and click the Remove from Check button. Tip: You can change the column widths and row heights by dragging the boundaries of the column and row headers. Accept the rest of the settings as default and click OK. QuickTest adds the table checkpoint to your test. It is displayed in the Keyword View as a new step under the Book a Flight: Mercury page. 3 Save the test. Choose File > Save or click the Save button. 39 Lesson 4 Creating Checkpoints Running and Analyzing a Test with Checkpoints In this section, you will review your test with checkpoints, run the test, and analyze the checkpoint results. 1 Expand the test and review your test. Choose View > Expand All or select the Action1 row and press the * shortcut key on your number keypad. The Keyword View displayed is similar to the following: Page Checkpoint Table Checkpoint Standard Checkpoint Text Checkpoint 2 Start running your test. Click Run or choose Automation > Run. The Run dialog box opens. Ensure that New run results folder is selected. Accept the default results folder name. Click OK. When the test run is completed, the Test Results window opens. 40 Lesson 4 Creating Checkpoints 3 View the test results. When QuickTest finishes running the test, the Test Results window opens. The test result should be Passed, indicating that all checkpoints passed. If one or more checkpoints had failed, the test result would be Failed. 4 View the results of the page checkpoint. In the results tree, expand (+) Checkpoint Iteration 1 (Row 1) > Action1 Summary > Welcome: Mercury Tours > Book a Flight: Mercury. Highlight Checkpoint "CheckLinks". In the Details pane, you can review the details of the page checkpoint, which lists the items checked. Tip: You can drag the bottom of the Details pane to enlarge it and/or scroll within the pane to view all of the checkpoint details. 41 Lesson 4 Creating Checkpoints The checkpoint passed because the actual values of the checked properties match the expected values. 42 Lesson 4 Creating Checkpoints 5 View the results of the table checkpoint. In the results tree, Book a Flight: Mercury page, expand (+) New York to San Francisco. Highlight Checkpoint "CheckCost". In the Details pane, you can review the details of the table checkpoint. You can also review the values of the table cells (cell values that were checked are displayed in black; cell values that were not checked are displayed in gray). The checkpoint passed because the actual value of the checked cell matches the expected value. 43 Lesson 4 Creating Checkpoints 6 View the results of the standard checkpoint. In the results tree, Book a Flight: Mercury page, expand (+) passFirst0. Highlight Checkpoint "CheckName". In the Details pane, you can review the details of the standard checkpoint, which lists the properties that were checked and their values. The checkpoint passed because the actual values of the checked properties match the expected values. 44 Lesson 4 Creating Checkpoints 7 View the results of the text checkpoint. In the results tree, expand (+) Checkpoint Iteration 1 (Row 1) > Action1 Summary > Welcome: Mercury Tours> Flight Confirmation: Mercury. Highlight Checkpoint "CheckDepartingText". In the Details pane, you can review the details of the text checkpoint. The checkpoint passed because the actual text matches the expected text. 8 Close the Test Results window. Choose File > Exit. 45 Lesson 4 Creating Checkpoints 46 5 Parameterizing Tests When you test your applications, you may want to check how the application performs the same operations with multiple sets of data. For example, suppose you want to check how your Web site responds to ten separate sets of data. You could record ten separate tests, each with its own set of data. Alternatively, you can create Data Table parameters so that your test runs ten times, each time using a different set of data. In this lesson you will learn about: Defining a Data Table Parameter Adding Parameter Values to a Data Table Modifying Steps Affected by Parameterization Running and Analyzing a Parameterized Test 47 Lesson 5 Parameterizing Tests Defining a Data Table Parameter In the previous lessons, you reserved a flight from New York to San Francisco. New York is a constant value, which means that New York is the departure city each time you run the test. In this exercise you will make the departure city a parameter so that you can use a different departure city for each test run. 1 Start QuickTest and open the Checkpoint test. If QuickTest is not already open, choose Start > Programs > QuickTest Professional > QuickTest Professional. If the Welcome window opens, click Open Existing. If QuickTest opens without displaying the Welcome window, choose File > Open > Test or click the Open button down arrow and choose Test. In the Open Test dialog box, locate and select the Checkpoint test, then click Open. 2 Save the test as Parameter. Choose File > Save As. Save the test as Parameter. 3 Confirm that the Active Screen option is enabled. If you do not see the Active Screen at the bottom of the QuickTest window, click the Active Screen button, or choose View > Active Screen. 4 Confirm that the Data Table option is enabled. If you do not see the Data Table at the bottom of the QuickTest window, click the Data Table button, or choose View > Data Table. 5 Select the text to parameterize. In the Keyword View, expand Action1 > Welcome: Mercury Tours > Find a Flight: Mercury. In the fromPort row in the Keyword View, click the Value cell and then click the parameterization icon 48 Lesson 5 Parameterizing Tests The Value Configuration Options dialog box opens. 6 Set the parameterization properties. Select the Parameter radio button. This lets you replace the constant value (New York) with a parameter. Confirm that the DataTable option is selected. This means that the value of the parameter will be taken from the QuickTest Data Table. The Name box is enabled and displays p_Item. Delete this and enter departure. Click OK to close the dialog box. QuickTest adds the departure parameter to the Data Table as a new column and inserts New York in the first row under it. 49 Lesson 5 Parameterizing Tests New York will be the first of several departure cities that QuickTest will use during test runs of the application. New Column in Data Table Note the change in the step's appearance in the Keyword View. Previously, the step was displayed as fromPort Select New York. Now, when you click the Value cell, the following information is displayed, indicating that the value is parameterized using a Data Table parameter called departure: When you click any other cell the step is displayed as fromPort Select DataTable("departure", dtGlobalSheet). Adding Parameter Values to a Data Table As you saw, QuickTest displays parameter values in the Data Table. In this section, you will add two more departure cities to the Data Table, so that QuickTest can test the application with this data. 1 Enter additional cities in the departure column. Click row 2 in the departure column and type Portland. Click row 3 and type Seattle. Press Enter. 2 Save the test. Choose File > Save or click the Save button. 50 Lesson 5 Parameterizing Tests Modifying Steps Affected by Parameterization After parameterizing one step in a test, other test objects might be affected when the value of the parameterized step changes. If so, you must modify the expected values of those objects to match the value resulting from the parameterized step. In this section, you will modify the text checkpoint so that when running the test, QuickTest checks for the text that matches the current departure city. 1 Locate the text checkpoint to modify. In the Keyword View, expand Welcome: Mercury Tours. Right-click Flight Confirmation: Mercury and select Checkpoint Properties. The Text Checkpoint Properties dialog box opens. 51 Lesson 5 Parameterizing Tests 2 Parameterize the text checkpoint. In the Checked Text area, New York is displayed in the Constant box. New York is the expected value for the checkpoint for every iteration. Select Parameter and click the Parameter Options button. The Parameter Options dialog box opens. In the Name box, select departure. This instructs the checkpoint to use the departure parameter values in the Data Table for the expected results. Click OK to close the Parameter Options dialog box, and then click OK again to close the Text Checkpoint Properties dialog box. The checkpoint is now parameterized. 3 Save the test. Choose File > Save or click the Save button. 52 Lesson 5 Parameterizing Tests Running and Analyzing a Parameterized Test You will now run the modified Parameter test. QuickTest will run the test three times, once for each departure city in the Data Table. Each test run is called an iteration. 1 Run the Parameter test. Click Run on the Testing toolbar or choose Automation > Run. The Run dialog box opens. Select New run results folder and accept the default results folder name. Click OK. When the test run is completed, the Test Results window opens. 2 Examine the results summary. The Test Results window shows that the second and third iterations of the test failed, even though the text checkpoint passed in all three iterations. See below for further information on why the iterations failed. Iteration 2: In the results tree, expand Parameter Iteration 2 > Action1 Summary > Welcome Mercury Tours > Flight Confirmation: Mercury. 53 Lesson 5 Parameterizing Tests Highlight Checkpoint "CheckDepartingText". The checkpoint results in the Details pane show that Portland was the expected result and the actual result. Therefore, the checkpoint passed. You can also see, in the Application pane, that the flight information reflects the flight from Portland. Iteration 3: In the results tree, expand (+) Parameter Iteration 3 > Action1 Summary > Welcome Mercury Tours > Flight Confirmation: Mercury. Highlight Checkpoint "CheckDepartingText". The checkpoint results in the Details pane show that Seattle was the expected result and the actual result. Therefore, the checkpoint passed. The Application pane shows the flight information for the flight from Seattle. 54 Lesson 5 Parameterizing Tests The table below summarizes checkpoint in each iteration: Iteration #1 #2 #3 Expected Text New York Portland Seattle the results of the text Actual Text New York Portland Seattle Result Checkpoint Passed Checkpoint Passed Checkpoint Passed Note: Although the text checkpoints passed in all three iterations, the second and third iterations of the test still failed because the table checkpoint failed in these iterations--the ticket price changed when the departure city changed. In the next lesson, "Creating Output Values", you will modify the table checkpoint so that when you run your test, QuickTest will update the expected ticket price in the checkpoint with the correct ticket price for the current departure city. 3 Close the Test Results window. Choose File > Exit to close the Test Results window. 55 Lesson 5 Parameterizing Tests 56 6 Creating Output Values In the previous lesson, you created parameters that inserted different data into each iteration of a test run. You can also retrieve data from your application and output it to the Data Table, using output values. This data can then be used at a later stage in the test. QuickTest displays the retrieved data, following the test run, in the Runtime Data Table. For example, you can use an output value to verify that the date or flight number is correctly displayed in two different Web pages, by using the value obtained in one page as the expected text that QuickTest checks for in the other page. In this lesson you will learn about: Value Creating an Output Running and Analyzing a Test with Output Values Creating an Output Value In the previous lesson, the second and third iterations of your test failed because the ticket price changed when the departure city changed. The checkpoint that checked the fare of the outbound flight in the Book a Flight: Mercury page did not update its expected value as the fare changed. In this lesson, you will create an output value that retrieves the outbound fare from the Select a Flight: Mercury page in each test iteration. You will then modify the table checkpoint you created, so that it checks that the price displayed in the Book a Flight: Mercury page matches the price captured in the Select a Flight: Mercury page. 57 Lesson 6 Creating Output Values 1 Start QuickTest and open the Parameter test. If QuickTest is not already open, choose Start > Programs > QuickTest Professional > QuickTest Professional. If the Welcome window opens, click Open Existing. If QuickTest opens without displaying the Welcome window, choose File > Open or click the Open button. In the Open Test dialog box, locate and select the Parameter test, then click Open. 2 Save the test as Output. Choose File > Save As. Save the test as Output. 3 Confirm that the Active Screen option is enabled. If you do not see the Active Screen at the bottom of the QuickTest window, click the Active Screen button, or choose View > Active Screen. 4 Select the text you want to use as an output value. In the Keyword View, expand Welcome: Mercury Tours and click the Select a Flight: Mercury page. The page is displayed in the Active Screen. In the Active Screen, highlight the fare, without the $ sign, for the outbound flight (New York to San Francisco) --270. 58 Lesson 6 Creating Output Values Right-click the highlighted text and select Insert Text Output. The Text Output Value Properties dialog box opens. 5 Rename the output value. In the Name box, enter PriceOutput as the new output value name. 59 Lesson 6 Creating Output Values 6 Set the output value settings. Click the Modify button to open the Output Options dialog box. The Name box displays Select_a_Flight_MercuryOutput_Text_out. Delete this and enter depart_flight_price. Click OK to accept the other default settings and close the Output Options dialog box. Click OK again to close the Text Output Value Properties dialog box. QuickTest adds the depart_flight_price column to the Data Table. QuickTest adds the output value operation to the Select a Flight: Mercury page in the Keyword View. 7 Modify the table checkpoint that checks the ticket price displayed in the flight Summary table. In the Keyword View, expand Welcome:Mercury Tours > Book a Flight: Mercury. Right-click Checkpoint ("CheckCost") in the Value column, and select Checkpoint Properties. The Table Checkpoint Properties dialog box opens. 60 Lesson 6 Creating Output Values Click column 3 in row 3 (the checked cell). In the Expected Data tab, select Parameter and click the Parameter Options button. The Parameter Options dialog box opens. In the Name box, select depart_flight_price. Click OK to close the Parameter Options dialog box. 61 Lesson 6 Creating Output Values The Table Checkpoint Properties dialog box is redisplayed, with a parameterization icon next to the table value you parameterized. Parameterized Value Click OK to close the Table Checkpoint Properties dialog box. The checkpoint is now parameterized. 8 Save the test. Choose File > Save or click the Save button. 62 Lesson 6 Creating Output Values Running and Analyzing a Test with Output Values You will now run the test and examine the results. 1 Run the Output test. Click the Run button or choose Automation > Run. The Run dialog box opens. Select New run results folder and accept the default results folder name. Click OK. When the test run is completed, the Test Results window opens. 2 Examine the run-time data results. In the Test Results window, select Run-Time Data Table from the results tree. The output values used during the test run are displayed in a grid. Note that a different price is shown in the depart_flight_price column for each iteration. 3 Examine the checkpoint results. Choose View > Expand All. In Output Iteration 1 (Row 1), under the Book a Flight: Mercury page, click Checkpoint "CheckCost". 63 Lesson 6 Creating Output Values Note that in the Details pane, the checkpoint is marked in green as passed because the price of the ticket for the first flight in the Summary table matched the expected value obtained from the Select a Flight page. Examine the checkpoints for Iterations 2 and 3 as well. In the Details pane, these checkpoints are also marked in green as passed, for the same reason. 4 Close the Test Results window. Choose File > Exit to close the Test Results window. 64 7 Using Regular Expressions In Lesson 4, "Creating Checkpoints," you created a text checkpoint that searched for a specific text string. You can use regular expressions to increase the flexibility and adaptability of your tests. In this lesson you will learn about: Syntax Regular Expression Working with Regular Expressions Running and Analyzing a Test with Regular Expressions Regular Expression Syntax Regular expressions enable QuickTest to identify objects and text strings with varying values. You can use regular expressions when defining the properties of an object, the methods of an argument, when parameterizing a step, and when creating checkpoints with varying values. A regular expression is a string that specifies a complex search phrase. By using special characters such as a period (.), asterisk (*), caret (^), and brackets ([ ]), you define the conditions of the search. For more information on regular expression syntax, refer to the Mercury QuickTest Professional User's Guide. 65 Lesson 7 Using Regular Expressions Working with Regular Expressions In this lesson, you will create a text checkpoint on a date text string that changes according to the selected flight date. You can define the date as a regular expression so that the checkpoint checks that the captured text string matches the expected format, rather than checking the exact text. To do this, you will create a text checkpoint with a regular expression that will match any single character within a defined range. 1 Start QuickTest and open the Recording test. If QuickTest is not already open, choose Start > Programs > QuickTest Professional > QuickTest Professional. If the Welcome window opens, click Open Existing. If QuickTest opens without displaying the Welcome window, choose File > Open or click the Open button. In the Open Test dialog box, locate and select the Recording test, then click Open. 2 Save the test as RegExpression. Choose File > Save As. Save the test as RegExpression. 3 Confirm that the Active Screen option is enabled. If you do not see the Active Screen at the bottom of the QuickTest window, click the Active Screen button, or choose View > Active Screen. 4 Select the text for which you will create the checkpoint. In the Keyword View, expand Welcome: Mercury: Tours and click the Select a Flight: Mercury page. The page is displayed in the Active Screen. In the Active Screen, scroll up and highlight the date for the outbound flight, New York to San Francisco (12/29/2005). Right-click the highlighted string and select Insert Text Checkpoint. The Text Checkpoint Properties dialog box opens. 66 Lesson 7 Using Regular Expressions 5 Enter the regular expression for the text you want to check. In the Checked Text area, click the Constant Value Options button. The Constant Value Options dialog box opens. In the Value box, replace the displayed date with [0-1][0-9]/[0-3][09]/200[0-9]. This instructs QuickTest to check that each character in the selected text matches the number-range format defined by the regular expression. The expression checks for the following format: MM/DD/200Y. Select the Regular expression check box. A message box prompts you to insert the backslash character before each special character. Click No. Note: Clicking Yes would cause QuickTest to treat the special characters ( [ ), ( - ) and ( ] ) as literal characters and not as a regular expression. 67 Lesson 7 Using Regular Expressions Click OK to close the Constant Value Options dialog box. 6 Rename the checkpoint. In the Name box, enter CheckExpectedText as the new checkpoint name. Click OK to accept the other default settings and close the Text Checkpoint Properties dialog box. QuickTest adds the text checkpoint to your test. It is displayed as a check operation on the Select a Flight: Mercury page in the Keyword View. 7 Save the test. Choose File > Save or click the Save button. 68 Lesson 7 Using Regular Expressions Running and Analyzing a Test with Regular Expressions In this exercise you will run the test and examine the checkpoint results. 1 Run the RegExpression test. Click the Run button or choose Automation > Run. The Run dialog box opens. Select New run results folder and accept the default results folder name. Click OK. When the test run is completed, the Test Results window opens. 2 Examine the checkpoint results. In the results tree, expand (+) Test RegExpression Summary > RegExpression Iteration 1 (Row 1) > Action1 Summary > Welcome: Mercury Tours > Select a Flight: Mercury Select CheckPoint "CheckExpectedText". 69 Lesson 7 Using Regular Expressions The checkpoint passed because the text was displayed in the format specified by the regular expression. 3 Exit the Test Results window. Choose File > Exit to close the Test Results window. 70 8 Dividing Tests into Multiple Actions Actions divide your test into logical sections. When you create a new test, it contains a call to one action. By dividing your tests into calls to multiple actions, you can design more modular and efficient tests. In this lesson you will learn about: Working with Multiple New Actions Actions Creating Inserting Existing Actions Parameterizing an Action Running and Analyzing a Multi-action Test Working with Multiple Actions If you examine one of the tests you created in the previous lessons, you will see that it can be divided into several distinct processes: You logged into the Mercury Tours site. You submitted a flight order. You logged out. Assume that you wanted to run your test for three different flight orders. As we saw in Lesson 5, "Parameterizing Tests", you can parameterize your test so that it runs the test three times using three different sets of data. You can also organize your test so that only the second procedure runs three times, simulating a single user logging in, ordering three flights, and logging out. You do this by dividing your test into calls to different actions. 71 Lesson 8 Dividing Tests into Multiple Actions To divide your test into calls to different actions, you can insert a call to a new action, split an existing action into calls to two actions, insert a call to a copy of an existing action, or insert a call to an existing action. You can insert calls to actions into your test during your recording session or afterward. Use one of the following menu options or toolbar buttons to add actions to your test: Insert > Call to New Action or use the Insert Call to New Action button. You can click the down arrow and choose Call to Copy of Action or Call to Existing Action. Edit > Action > Split Action or use the Split Action button. Insert > Call to Copy of Action or right-click an action and choose Insert Call to Copy of Action. Insert > Call to Existing Action or right-click an action and choose Insert Call to Existing Action. Creating New Actions In this exercise you will create a test and divide it into action calls. Recording the Test 1 Start QuickTest and open a new test. For more information, see step 1 of "Recording a Test" on page 12. 2 Start recording on the Mercury Tours Web site. In the coming steps, you will record a test similar to the one recorded in the "Recording Tests" lesson. However, this test is designed slightly differently to optimize the test for a multiaction test. Confirm that all Web browsers are closed. 72 Lesson 8 Dividing Tests into Multiple Actions Choose Automation > Record or click the Record button. The Record and Run Settings dialog box opens. In the Web tab, select Open the following address when a record or run session begins. Confirm that the URL in the first box is http://newtours.mercury.com and in the second box, choose a browser on which to run your test session. Confirm that the Do not record and run on browsers that are already open and Close the browser when the test closes options are selected. In the Windows Applications tab, confirm that Record and run only on is selected, and that all three check boxes are cleared. Click OK. QuickTest begins recording, and your browser opens to the Mercury Tours Web site. 73 Lesson 8 Dividing Tests into Multiple Actions 3 Sign in to the Mercury Tours Web site. In the User Name and Password boxes, type the name and password you registered with Mercury Tours. Click Sign-In. The Flight Finder page opens. 4 Enter flight details. Make the following selections: Departing From: New York On: Dec 29 Arriving In: San Francisco Returning: Dec 31 Note: For the purposes of this tutorial, you must select each of the above options, even if one or more option is already selected. Click CONTINUE to accept the other default selections. The Select Flight page opens. 5 Select a flight. Click CONTINUE to accept the default flight selections. The Book a Flight page opens. 6 Enter required passenger and purchase information. Enter the required information (fields with red text labels) in the Passengers and Credit Card sections. At the bottom of the page, click SECURE PURCHASE. The Flight Confirmation page opens. 74 Lesson 8 Dividing Tests into Multiple Actions 7 Return the browser to the Flight Finder page. At the bottom of the Flight Confirmation page, click BACK TO FLIGHTS button. The Flight Finder page opens. Ending the recording on the Flight Finder page enables you to create an action that starts and ends on the same page, so that you can call the action multiple times if you wish. 8 Stop Recording. In QuickTest, click Stop to stop the recording process. 9 Save the test as ActionA. Choose File > Save. Save the test as ActionA. Dividing the Test into Two Actions Since your test currently contains two main processes: signing-in and purchasing a flight, it makes sense to divide the test into separate actions. 1 Select the page where you want the second action to begin. In the Keyword View, expand Action1 > Welcome: Mercury Tours. 75 Lesson 8 Dividing Tests into Multiple Actions 2 Split the test into two actions. Select the first Find a Flight: Mercury page and choose Edit > Action > Split Action or click the Split Action button. The Split Action dialog box opens. 3 Enter names and descriptions for the two actions. In the Name box of the 1st action type: Sign_in. In the Description box of the 1st action, type: Enters user name and password to sign in. In the Name box of the 2nd action type: FlightOrder. In the Description box of the 2nd action, type: Chooses and purchases a flight. Click OK to close the Split Action dialog box and accept the other default selections. The two actions are displayed in the Keyword View. Choose View > Expand All to examine the contents of each action. Note that the FlightOrder action begins and ends with the Find a Flight: Mercury page. 76 Lesson 8 Dividing Tests into Multiple Actions Inserting a Call to a New Action Now you will insert a call to a new action and record the step of returning to the Mercury Tours home page so that the entire test begins and ends on the same page. 1 Insert the ReturnHome action. Choose Insert > Call to New Action or click the Insert Call to New Action button. The Insert Call to New Action dialog box opens. Enter ReturnHome in the Name box, confirm that At the end of the test is selected, and click OK. The dialog box closes and the ReturnHome action is added to the end of your test. 2 Prepare the application for recording. Confirm that your Web browser is open to the Flight Finder page. If your browser is not open, open it to the Mercury Tours site (http://newtours.mercury.com) and sign in. The Flight Finder page opens. Position the applications on your desktop so that you can see both QuickTest and the Web browser. 77 Lesson 8 Dividing Tests into Multiple Actions 3 Change the Record and Run settings. Currently, your Record and Run settings are set so that a new browser opens each time you begin recording your test. However, because you want to record a step on a browser that you have already opened and prepared, you need to change the Record and Run settings before you begin recording. In QuickTest, choose Automation > Record and Run Settings. The Record and Run Settings dialog box opens. In the Web tab, select Record and run test on any open browser and click OK. 4 Record the ReturnHome action. In the Keyword View, select the new ReturnHome action icon. Choose Automation > Record or click the Record button. Click the Home navigation link on the left side of the Flight Finder page. The Mercury Tours home page opens. 78 Lesson 8 Dividing Tests into Multiple Actions In QuickTest, click Stop to stop the recording process. 5 Return the Record and Run Settings to their original settings. You changed the record and run settings for the purposes of recording the ReturnHome action, but this change also affects the way QuickTest runs the test. You want QuickTest to open a new browser to the Mercury Tours home page when you run the test, so you need to reapply the original settings. Choose Automation > Record and Run Settings. The Record and Run Settings dialog box opens. In the Web tab, select Open the following address when a record or run session begins. Confirm that http://newtours.mercury.com is displayed in the first box and click OK. 6 Save the test. Choose File > Save or click the Save button. Setting Actions as Reusable Actions Reusable actions are like functions in programming. When you have a process that you may need to include in several tests, you record, modify, and enhance the steps of the process and save them in a reusable action. Then you can call the action from other tests, rather than recording, modifying, and enhancing the same steps each time. To call an action from another test, you must make it a reusable action in the test with which it was stored. The Sign_in and ReturnHome action you created in this lesson can apply to almost any test you might create on the Mercury Tours site, so it makes sense to make them reusable actions. 79 Lesson 8 Dividing Tests into Multiple Actions 1 Make the Sign_in action reusable. In the Keyword View, right-click the Sign_in action and choose Action Properties. The Action Properties dialog box opens. Select the Reusable action check box and click OK. If a message box is displayed, read the message, click Do not show this dialog box again, and click OK. The action icon changes to a reusable action icon 2 View the details of the Sign_in action. Note that you no longer have the option to expand the Sign_in action within the Keyword View. If the Action List was not previously displayed above the Keyword View, it is displayed after you convert the action to a reusable action. The Action List displays a list of all reusable and external actions in the test. View the details of the Sign_in action by selecting Sign_in from the Action List. The details of the Sign_in action are displayed. In the Action List, select Test Flow to return to the main flow of the test in the Keyword View. 3 Make the ReturnHome action reusable. Repeat steps 1 and 2 for the ReturnHome action. 4 Save the test. Choose File > Save or click the Save button. 80 Lesson 8 Dividing Tests into Multiple Actions Inserting Existing Actions When you plan a suite of tests, you may realize that each test requires one or more identical activities, such as signing in. Once you have created the action and stored it with one test, you can insert either a call to a copy of the existing action, or a call to the existing action, into other tests. When you insert a call to a copy of an existing action, you can make changes to the copied action, and your changes will neither affect, nor be affected by, any other test. Calls to existing actions, however, are read-only in the calling test. They can be modified only in the test in which they were stored. Calls to existing actions enable you to call the same action from several tests and make it easy to maintain tests, because when your application changes you only have to update the existing action stored with the original test. In the following exercises you will create a new test that is similar to the ActionA test, except that the Sign_in and ReturnHome actions are external actions (calls to existing actions stored with other tests) and the FlightOrder action is slightly modified. Inserting Calls to Actions First, you will insert calls to the reusable ReturnHome actions from ActionA into ActionB. 1 Open a new test. For more information, see step 1 of "Recording a Test," on page 12. Sign_in and 81 Lesson 8 Dividing Tests into Multiple Actions 2 Insert a call to the Sign_in action. Choose Insert > Call to Existing Action. The Select Action dialog box opens. Click the browse button next to the From test box. Select the ActionA test in the Open Test dialog box, and click Open. Note that only reusable actions from the ActionA test are displayed in the Select Action dialog box. Select the Sign_in action. In the Location area, select At the end of the test. Click OK. The call to Sign_in [ActionA] action is added to the end of the test as a call to an external action with the icon. Note that you cannot expand the Sign_in action call in the test flow in the Keyword View. To view the steps in the Sign_in action, select it from the Action List. The action call you inserted is read-only. To modify the action, you must open the original (ActionA) test and modify the action there. Select Test Flow in the Action List to return to the main flow of the test in the Keyword View. 82 Lesson 8 Dividing Tests into Multiple Actions 3 Insert a call to the ReturnHome action. Use the instructions in step 2 to insert a call to the ReturnHome action from ActionA. The ReturnHome action is added to the end of your test. Note: When you insert a call to the ReturnHome action, Sign_in [ActionA] is selected in the Keyword View. Since the Sign_in action is read-only, you cannot select the location in your test in which to insert the call to the ReturnHome action. Therefore, the action call is automatically added at the end of the test. 4 Save the test. Choose File > Save or click the Save button. Save the test as ActionB. 5 Modify the original ReturnHome action. Choose File > Open > Test. Browse to ActionA, and click Open. Double-click the ReturnHome action icon to display its contents. (This is equivalent to selecting the ReturnHome action from the Action List.) Make sure that the Comment column is displayed in the Keyword View. If it is not, right-click on any Keyword View column header and select Comment from the displayed list. In the Keyword View, select the ReturnHome action icon and choose Insert > Comment to add a comment about the purpose of the Home step. The Insert Comment dialog box opens. In the edit box, enter: Return to page used in first step of the test. Click OK. The comment step is added as the first step in the action, and you can see the comment text in the Comment column of that step. 83 Lesson 8 Dividing Tests into Multiple Actions If the comment is too long to see, it is displayed in a tooltip when you move your cursor over the Comment column. 6 Save the test. Choose File > Save or click the Save button. 7 Confirm that the modification made in the original ReturnHome action is also included in the calling test. Choose File > Open > Test. Browse to ActionB and click Open. Double-click the ReturnHome [ActionA] action icon to display it. Note that the comment you added to the original action (ActionA) also exists in the calling test (ActionB). In the Action toolbar, select Test Flow from the Action List to return to the main flow of the test in the Keyword View. Inserting a Copy of an Action Now, you will insert a copy of the FlightOrder action. 1 Confirm that the ActionB test is open. If not, choose File > Open > Test. Browse to ActionB and click Open. 2 Insert a copy of the FlightOrder action. Choose Insert > Call to Copy of Action. 84 Lesson 8 Dividing Tests into Multiple Actions The Select Action dialog box opens. Click the browse button next to the From test box. Select the ActionA test in the Open Test dialog box, and click Open. The actions from the ActionA test are displayed in the Action List. Select the FlightOrder action. Note that the description of the selected action is displayed in the Action description box. In the Location area, select At the end of the test. Click OK. The Copy of FlightOrder action is added to the end of the test. Note that the call to the copy of the action you inserted is just like any other action call in your test. You can modify the steps in the call to the copied action just as you would those of any other action call. 3 Modify the Copy of FlightOrder action. In the Keyword View, expand Copy of FlightOrder > Welcome: Mercury Tours > Find a Flight: Mercury. Select fromPort and click the Value cell. Change the value in the Value cell to "London" (including the quotation marks) and click any other row in the Keyword View. 85 Lesson 8 Dividing Tests into Multiple Actions 4 Call the Copy of FlightOrder action after the Sign_in action. You want the Copy of FlightOrder action to be immediately after the Sign_in action. Since you cannot drag any action to be immediately after a reusable action, you must perform the following steps to change the order of the action calls. Select the Copy of FlightOrder action and drag it immediately below the Action1 action in the Keyword View. A black line indicates the new position. To ensure that you position the Copy of FlightOrder action as a sibling of Action1 and not as a child, drag the line to the left until it meets the vertical dotted line. Then, select the Sign_in action and drag it immediately below the Action1 action in the Keyword View. Ensure that you position the Sign_in action as a sibling of Action1 and not as a child. The Copy of FlightOrder action is now immediately after the Sign_in action. 5 Delete Action1 from the test. Every new test contains a default Action1 action call. You can now delete the Action1 action call. In the Keyword View, select Action1 and choose Edit > Delete or press the Delete key on your keyboard. A confirmation message opens. Click Yes to delete the action call. 6 Save the test. Choose File > Save or click the Save button. 86 Lesson 8 Dividing Tests into Multiple Actions 7 Confirm that the original FlightOrder action was not modified. Choose File > Open > Test. Browse to ActionA, and click Open. Expand FlightOrder > Welcome: Mercury Tours > Find a Flight: Mercury. Note that the change of departure city you made in the ActionB test did not affect the original action in ActionA (New York is still the departure city in ActionA). Parameterizing an Action If you look at the Data Table at the bottom of the QuickTest window in the ActionB test, you will see four tabs: Global, Copy of FlightOrder, Sign_in [ActionA], and ReturnHome [ActionA]. Note: If the Data Table is not displayed, choose View > Data Table to display it, or click the Data Table button. The Global tab is a data sheet whose data is used for the entire test. If five rows of data are displayed in the Global table, the test will run five times. In addition, you can create data sets for each action, using the relevant action sheet. If you parameterize a step using an action parameter and enter five rows of data in the corresponding sheet, you can define that action to run five times within each test iteration. Note: The Sign_in [ActionA] and ReturnHome [ActionA] data sheets are displayed in gray and cannot be edited because each of these data sheets belong to the corresponding called action and can be edited from the called action's original test only. 87 Lesson 8 Dividing Tests into Multiple Actions In this section, you will create a data set for the FlightOrder action to check how the application handles multiple orders during a single user session. 1 Open the ActionB test. If the ActionB test is not already open, choose File > Open and browse to ActionB. Click Open. 2 Select a step to parameterize. Expand Copy of FlightOrder > Welcome: Mercury Tours > Find a Flight: Mercury. In the toPort row in the Keyword View, click the Value cell and then click the parameterization icon . The Value Configuration Options dialog box opens. 3 Enter the parameter information. Select Parameter and confirm that the DataTable option is selected. In the Name box, type ArrivalCity. 88 Lesson 8 Dividing Tests into Multiple Actions You are creating this data set exclusively for the Copy of FlightOrder action. Therefore, select Current action sheet (local). Click OK to close the Value Configuration Options dialog box. QuickTest automatically adds the ArrivalCity column to the Copy of FlightOrder data sheet and inserts San Francisco into the first cell of the ArrivalCity column. 4 Parameterize additional steps. It is not logical for a single customer to fly to two different locations on the same dates, so it makes sense to parameterize the departure and arrival dates. In the fromMonth row in the Keyword View, click the Value cell and then click the parameterization icon . The Value Configuration Options dialog box opens. Select Parameter and confirm that the DataTable option is selected. In the Name box, type fromMonth. Select Current action sheet (local) in the Value Configuration Options dialog box and click OK. In the toMonth row in the Keyword View, click the Value cell and then click the parameterization icon . The Value Configuration Options dialog box opens. Select Parameter and confirm that the DataTable option is selected. In the Name box, type toMonth. Select Current action sheet (local) in the Value Configuration Options dialog box and click OK. 5 Enter the parameterization data in the Data Table. In the Data Table, click the Copy of FlightOrder tab. Type Portland in the second row of the ArrivalCity column. Type Oct in the second row of the fromMonth and toMonth columns. Click an empty cell of the first or second row to save your changes. 6 Set the action to run all the data in the local Data Table. By default, QuickTest only runs one iteration of each action in a test. You want QuickTest to use all the data in the Copy of FlightOrder tab. 89 Lesson 8 Dividing Tests into Multiple Actions Right-click the Copy of FlightOrder action in the Keyword View and choose Action Call Properties. The Action Call Properties dialog box opens. Select Run on all rows in the Run tab. If a message box opens, read it and then click OK to close it. Click OK to close the Action Call Properties dialog box. 7 Save the test. Choose File > Save or click the Save button. You have now created a test that signs in to the Mercury Tours site, submits two flight orders: a flight from London to San Francisco from Dec 29 to Dec 31, and a flight from London to Portland from Oct 29 to Oct 31, and then returns to the starting point of the test by clicking the Home link. 90 Lesson 8 Dividing Tests into Multiple Actions Running and Analyzing a Multi-action Test You will now run the ActionB test. The entire test will run only once, but the FlightOrder action will run twice; one time for each set of data in the Copy of FlightOrder data sheet. 1 Run the ActionB test. Confirm that all Web browsers are closed. Click Run or choose Automation > Run. The Run dialog box opens. Select New run results folder and accept the default results folder name. Click OK. When the test run is completed, the Test Results window opens. 2 Examine the test results. Examine the Results Summary. The test is marked as Done. This indicates that the test ran without any failures (there were no checkpoints to "pass"). Expand Test ActionB Summary > ActionB Iteration 1 (Row 1) in the Test Results window. Select the Copy of FlightOrder Summary action in the results tree. 91 Lesson 8 Dividing Tests into Multiple Actions Note that within the summary, the results of both iterations are displayed. 3 Close the Test Results window. Choose File > Exit to close the Test Results window. 92 9 Where Do You Go from Here? Now that you have completed the exercises in this tutorial, you are ready to apply the QuickTest concepts and the skills you learned to testing your own application. In this lesson you will learn about: Testing Your Own Application--Getting Started Getting Additional Information Documentation Updates Testing Your Own Application--Getting Started In this tutorial, you learned about the basic tools needed for testing applications and Web sites. We suggest that you follow the procedure outlined below when testing your own application. 1 Plan your test. Decide how to organize your test. Consider what users will want to accomplish when deciding which operations to record. Confirm that your application and QuickTest are set to match the needs of your test. Decide how to store the objects in your test. You can store the objects for each action in its corresponding local object repository, or you can store the objects for each action in one or more common (shared) object repositories. You can also use the same shared object repository for multiple actions. If you are new to testing, you may want to use a local object repository for each action. This is the default setting, and all objects are automatically added to the local repository of each action. 93 Lesson 9 Where Do You Go from Here? If you are familiar with testing, it is probably most efficient to work in the shared object repository mode. In this mode, you can use shared object repositories for one or more actions. This means that object information is kept in one central location. When the objects in your application change, you can update them in one location for multiple actions in multiple tests. For more information on object repositories, refer to the Mercury QuickTest Professional User's Guide. 2 Record your test. While recording (described in "Recording Tests" on page 11), follow the steps you expect users to perform as they navigate within your application or Web site. 3 Enhance your recorded test. Add checkpoints (described in "Creating Checkpoints" on page 27) to search for specific values of a page, object, text string, or table. Replace fixed values in your test with parameters (described in "Parameterizing Tests" on page 47) to check how your application performs the same operations with multiple sets of data. Create output values (described in "Creating Output Values" on page 57) to retrieve data during a test run. Where applicable, use regular expressions (described in "Using Regular Expressions" on page 65) to increase the flexibility and adaptability of your tests. You can further enhance your test with programming and conditional and loop statements, which add logic to your test. These are described in the QuickTest Professional User's Guide. 4 Debug your test. Debug your test to check that it operates smoothly and without interruption. For additional information on debugging, refer to the Mercury QuickTest Professional User's Guide. 94 Lesson 9 Where Do You Go from Here? 5 Run your test. Run your test on your application or Web site (described in "Running and Analyzing Tests" on page 21) to check that the application functions as expected. 6 Analyze the test results. Examine the results of your test to pinpoint defects in your application. (Refer to the appropriate sections of this tutorial to understand what to look for in the test results.) 7 Report defects. If you have Quality Center installed, you can submit any defects discovered to a Quality Center database. (Quality Center is Mercury Interactive's tool for software test management. For additional information, refer to the Mercury QuickTest Professional User's Guide and the documentation included with Quality Center.) Getting Additional Information In addition to this tutorial, the following online resources are included with QuickTest Professional: Readme (available from the QuickTest Professional Start menu program folder) Provides the latest news and information about QuickTest Professional. What's New (available from Help > What's New) Describes the newest features, enhancements, and supported environments in the current version of QuickTest Professional. Printer-Friendly Documentation Displays the complete documentation set in Adobe portable document format (PDF). Online books can be read and printed using Adobe Reader, which can be downloaded from the Adobe Web site (http:// www.adobe.com). 95 Lesson 9 Where Do You Go from Here? QuickTest Professional Context-Sensitive Help (available from dialog boxes and windows) Describes specific QuickTest dialog boxes and windows. QuickTest Professional User's Guide (available from Help > QuickTest Professional Help) Provides step-by-step instructions for using QuickTest Professional to test your application or Web site. The User's Guide describes many useful testing tasks and options not covered in this tutorial. Note: The QuickTest Professional User's Guide online version is a single volume, while the printed and PDF versions consists of two books, the QuickTest Professional Basic Features User's Guide and the QuickTest Professional Advanced Features User's Guide. QuickTest Professional Object Model Reference (available from Help > QuickTest Professional Help) Describes QuickTest Professional test objects, lists the methods and properties associated with each object, and provides syntax information and examples for the methods. QuickTest Professional Automation Object Model Reference (available from the QuickTest Professional Start menu program folder and from Help > QuickTest Automation Object Model Reference) Provides syntax, descriptive information, and examples for automation objects, methods, and properties. It also contains a detailed overview to help you get started writing QuickTest automation scripts. The automation object model assists you in automating test management, by providing objects, methods and properties that enable you to control virtually every QuickTest feature and capability. VBScript Reference (available from Help > QuickTest Professional Help) Contains Microsoft VBScript documentation, VBScript, Script Runtime, and Windows Script Host. including 96 Lesson 9 Where Do You Go from Here? Knowledge Base (available from Help > Knowledge Base) Uses your default Web browser to open the Mercury Customer Support knowledge base, which enables you to browse the Mercury and usercontributed knowledge base articles, and add your own articles. The URL for this Web site is http://support.mercury.com/cgi-bin/portal/CSO/ kbBrowse.jsp. Mercury Tours sample Web site and the Mercury Tours Windows sample flight application (both available from the QuickTest Professional Start menu program folder) The sample applications for QuickTest Professional are the basis for many of the examples in the documentation. The examples and instructions in this tutorial are based on the Mercury Tours Web site (http://newtours.mercury.com). Customer Support Web Site (available from Help > Customer Support Web Site) Uses your default Web browser to open the Mercury Customer Support Web site. This site enables you to browse the knowledge base and add your own articles, post to and search user discussion forums, submit support requests, download patches and updated documentation, and more. The URL for this Web site is http://support.mercury.com. Send Feedback (available from Help > Send Feedback) Enables you to send online Professional to the product team. feedback about QuickTest Mercury Home Page (available from Help > Mercury Home Page) Opens Mercury Interactive's home page in your default Web browser. This site provides you with the latest information about Mercury Interactive and its products, including new software releases, seminars and trade shows, customer support, and educational services. The URL for this Web site is http://www.mercury.com. Mercury Best Practices contain guidelines for planning, creating, deploying, and managing a world-class IT environment. Mercury provides three types of best practices: Process Best Practices, Product Best Practices, and People Best Practices. Licensed customers of Mercury software can read and use the Mercury Best Practices available from the Customer Support site, http://support.mercury.com. 97 Lesson 9 Where Do You Go from Here? Documentation Updates Mercury Interactive is continuously updating its product documentation with new information. You can download the latest version of this document from the Customer Support Web site (http://support.mercury.com). To download updated documentation: 1 In the Customer Support Web site, click the Documentation link. 2 Under Please Select Product, select QuickTest Professional. If QuickTest Professional does not appear in the list, you must add it to your customer profile. Click My Account to update your profile. 3 Click Retrieve. The Documentation page opens and lists the documentation available for the current release and for previous releases. If a document was recently updated, Updated appears next to the document name. 4 Click a document link to download the documentation. 98 Index A Action Properties dialog box 90 Action toolbar 7 actions 71-92 analyzing test results 91 calling 81 copying 84 creating 72 inserting existing 81 parameterizing 87 running tests 91 splitting 75 Active Screen 8 analyzing test results 23-26 actions 91 checkpoints 40 output values 63 parameterized tests 53 regular expressions 69 automated testing, benefits 1 Automation toolbar 5 creating tests procedure 93-95 with multiple actions 7192 with output values 57 customer support, online 97 D Data Table 8 assigning parameter values 50 Debug toolbar 6 Debug Viewer pane 8 documentation updates 98 E Edit toolbar 6 H Help, online 96 Home page 97 C calling actions 81 Checkpoint Properties dialog 31, 38 checkpoints analyzing test results 40 creating 27-45 page 33 running tests with 40 standard 29, 44 table 37 text 35 copying actions 84 creating actions 72 creating checkpoints 27-45 box I Information pane 8 input parameters 4755 Insert toolbar 6 K Keyword View 17 Knowledge Base 97 99 Index M manual testing, drawbacks 1 menu bar, QuickTest window 5 Mercury Best Practices 97 Mercury Interactive on the Web 97 Mercury Tours sample application 9, 97 Microsoft VBScript Reference 96 Missing Resources pane 8 modifying parameterized tests 51 multiple actions 71-92 Insert toolbar 6 menu bar 5 Missing Resources pane 8 Standard toolbar 5 status bar 8 Test pane 8 title bar 5, 8 Tools toolbar 7 View toolbar 7 R Readme, QuickTest Professional 95 Record and Run Settings dialog box 13 recording tests 11-19 regular expressions 65-70 resources, QuickTest online 95 Run dialog box 22 running tests 21-26 parameterized tests 53 with actions 91 with checkpoints 40 with output values 63 with regular expressions 69 O Object Selection - Checkpoint Properties dialog box 30, 33, 37 output values 57-64 P Page Checkpoint Properties dialog box 34 page checkpoints creating 33 results 41 parameter values, in Data Table 50 parameterized tests modifying 51 running and analyzing results 53 parameterizing actions 87 tests 47-55 parameters definition 48 input 47-55 S sample application, Mercury Tours 9, 97 Split Action dialog box 75 standard checkpoints creating 29 results 44 Standard toolbar 5 status bar, QuickTest window 8 support, online 97 Q QuickTest resources, online 95 QuickTest window 4 Action toolbar 7 Active Screen 8 Automation toolbar 5 Data Table 8 Debug toolbar 6 Debug Viewer pane 8 Edit toolbar 6 Information pane 8 T table checkpoints creating 37 results 43 technical support. support Test pane 8 See customer 100 Index test results actions 91 analyzing 23-26 checkpoints 40 output values 63 regular expressions 69 Test Results window 23 testing applications, how to begin 93-95 testing process 2 tests analyzing results 23-26 procedure for creating 93-95 recording 11-19 running 21-26 Text Checkpoint Properties dialog box 36 text checkpoints creating 35 results 45 Text Output Value Properties dialog box 59 title bar, QuickTest window 5, 8 toolbars Action 7 Automation 5 Debug 6 Edit 6 Insert 6 Standard 5 Tools 7 View 7 Tools toolbar 7 typographical conventions vii U updates, documentation 98 User's Guide 96 V values, output 57-64 View toolbar 7 W Web site, Mercury Interactive 97 What's New 95 101 Index 102 ...
View Full Document

Page1 / 172

testing - Mercury QuickTest Professional Tutorial Version...

This preview shows document pages 1 - 5. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online