Assignment-1_of_ED2 - direction, the stirrups of 10mm dia...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
ENGINEERING DRAWING II                                         ASSIGNMENT NO: 1                    DOA: 09-03-2009                                  DOS: 16-03-2009 Answer the following questions in SERIAL ORDER. QUESTIONS: 1. Draw a beam 0.5m x 0.5m x 10m which shows 4 bars of 20mm dia and the stirrups of 10mm dia placed at 12cm c/c. show its top and side view? 2. Draw a simple footing of 2m x 2m x 0.7m showing ground level and bars as follows 12mm dia – 10 in nos. in vertical direction and same in horizontal
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: direction, the stirrups of 10mm dia placed at 12cm c/c? 3. Draw a combined tapered footing of 2m x 5m x 0.7m showing ground level and bars as follows 12mm dia 10 in nos. in vertical direction and same in horizontal direction, the stirrups of 10mm dia placed at 12cm c/c? 4. Draw a cross section and longitudinal section of lintel on the door. 5. Draw a cross-section in which bars to be shown, Draw this section beam Column CIVIL ENGINEERING DEPARTMENT AMIT KUMAR DHIR...
View Full Document

This note was uploaded on 11/23/2010 for the course CIVIL 105 taught by Professor No during the Spring '10 term at Lovely Professional University.

Ask a homework question - tutors are online