englewood cliffs nj 1993 pp 48 51 full harmonic

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: S IP, Inc. VM210 Figure 210.2 Bending of Hex-to-tet Interface ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–481 VM211: Rubber Cylinder Pressed Between Two Plates Overview Reference: T. Tussman, K-J Bathe, “A Finite Element Formulation for Nonlinear Incompressible Elastic and Inelastic Analysis”, Computers and Structures, Vol. 26 Nos 1/2, 1987, pp. 357-409. Analysis Type(s): Static Analysis (ANTYPE = 0) Element Type(s): 2-D 4-Node Mixed u-P Hyperelastic Solid Elements (HYPER56) 3-D 8-Node Mixed u-P Hyperelastic Solid Elements (HYPER58) 2-D 8-Node Mixed u-P Hyperelastic Solid Elements (HYPER74) 3-D 10-Node Tetrahedral Mixed u-P Hyperelastic Solid Elements (HYPER158) 2-D 2-Node Surface-to-Surface Contact Elements (CONTA171) 2-D 3-node Surface-to-Surface Contact Elements (CONTA172) 3-D 4-Node Surface-to-Surface Contact Elements (CONTA173) 3-D 8-Node Surface-to-Surface Contact Elements (CONTA174) 2-D Target Segment Elements (TARGE169) 3-D Target Segment Elements (TARGE170) Input Listing:...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online