This preview shows page 1. Sign up to view the full content.
Unformatted text preview: 756 1.000 1. Solution recalculated 2. Corresponds to MFORX for element 4 in element solution output ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–79 VM32: Thermal Stresses in a Long Cylinder
Reference: S. Timoshenko, Strength of Material, Part II, Elementary Theory and Problems,
3rd Edition, D. Van Nostrand Co., Inc., New York, NY, 1956, pg. 234, problem
1. Analysis Type(s): Static Analysis (ANTYPE = 0) Element Type(s): 2-D Thermal Solid Elements (PLANE55)
2-D Structural Solid Elements (PLANE42) Input Listing: vm32.dat Test Case
A long thick-walled cylinder is maintained at a temperature Ti on the inner surface and To on the outer surface.
Determine the temperature distribution through the wall thickness. Also determine the axial stress σa and the
tangential (hoop) stress σt at the inner and outer surfaces. Figure 32.1 Long Cylinder Problem Sketch ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–80 VM32
E = 30 x 106 psi
α = 1.435 x 10-5 in/i...
View Full Document
This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.
- Spring '09
- The Land