ANSYS varification manual 9

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: n the solution and are assumed equal to 1.0. Density (ρ) is assigned as nearly zero (1 x 10-10) to avoid centrifugal effects in the problem. Since this is rigid body motion, the time step is chosen to obtain the solution at discrete locations. The speed of 400 rpm is obtained by rotating one revolution in 0.15 sec (1/400th of a minute). Results Comparison Rotationz, deg Deflection Target ANSYS Ratio 60 Deflectionx (in) -5.0 -5.0 1.00 90 Deflectiony (in) 10.0 10.0 1.00 180 Deflectionx (in) -20.0 -20.0 1.00 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–97 VM40 Rotationz, deg Deflection Target ANSYS Ratio 210 Deflectiony (in) -5.0 -5.0 1.00 315 Deflectionx (in) -2.93 -2.93 1.00 360 Deflectiony (in) 0.0 0.0 - Note — Axial stress, σ ≈ 0, at each position. Figure 40.2 Displacement of the Free End 1–98 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM41: Small Deflection of a Rigid Beam Overview Reference: Any Basic Statics and Strength of Material Book Analysis Type(s): Static Analysis (ANTYPE = 0)...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online