0 593 259 800 719 440 1000 792 651 1200 803 877

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Mid Status w2 = 3771 lb/in Ratio End Moment N, in-lb w1 = 2190 lb/in ANSYS Elastic Elastic - Midspan Deflection , in -0.357 -0.359 1.01 End Moment N, in-lb -5.97 x 10 1.00 Mid Moment M, in-lb -3.78 x 106 -3.80 x 106 1.01 End Status Plastic Plastic - Mid Status w3 = 9039 lb/in -5.98 x 10 At Yield At Yield - Midspan Deflection , in -2.09 6 6 -2.11 7 1.01 7 End Moment N, in-lb -1.51 x 10 -1.50 x 10 0.99 Mid Moment M, in-lb -8.36 x 106 -8.45 x 106 1.01 End Status 0.0200 0.0206 1.03 Mid Status 0.0089 0.0089 1.00 Note — δmid (midspan deflection) is UZ at node 10. N (fixed-end moment and M (midspan moment) are obtained from the reaction moments MY at nodes 1 and 10 respectively. The end and mid status are determined by comparing SAXL to the yield stress (σy). The total end strain is obtained y adding the quantities EPELAXL and EPPLAXL for element 1 (end l). The total mid strain is obtained by adding EPELAXL and EPPLAXL for element 9 (end J). ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SA...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online