0 75000 2250 ansys 001 562502 750003 2250 ratio 1000

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: to reach its largest deflection. One master degree of freedom (MDOF) is selected at the mass in the lateral direction. A static solution is done at the first load step. The integration time step (0.004 sec) is based on ≈ 1/25 of the period to allow the abrupt change in acceleration to be followed reasonably well and to produce sufficient printout for the theoretical comparison. Symmetry could have been used in the model. The time of maximum response (0.092 sec) is selected for the expansion pass calculation. ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–175 VM77 Results Comparison Target[1] Ratio tmax , sec 0.092 0.092 1.00 ymax , in Transient ANSYS 0.331 0.335 1.01 -18.6 -18.9 1.01 Expansion Pass Stressbend , ksi 1. 1–176 Based on graphical values ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM78: Transverse Shear Stresses in a Cantilever Beam Overview Reference: S. Timoshenko, J. N. Goodier, Theory of Elasticity, 2nd Edition, McGraw-Hill Book Co.,...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online