ANSYS varification manual 9

00 ansys verification manual ansys release 90 002114

This preview shows page 1. Sign up to view the full content.

This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: the top centroidal locations of element 1 (near inner edge) and element 6 (near outer edge). Figure 39.1 Circular Plate Problem Sketch ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–95 VM39 Material Properties E = 30 x 106 psi υ = .3 Geometric Properties a = 30 in b = 10 in t = .25 in Θ = 105 Loading Ma = 10 in-lb/in = 52.360 in-lb/10° segment Analysis Assumptions and Modeling Notes Since the problem is axisymmetric only a small sector of elements is needed. A small angle Θ = 10° is used for approximating the circular boundary with a straight-edged element. A radial grid with nonuniform (3:1) spacing is used. The calculated load is equally divided and applied to the outer nodes. Results Comparison Target ANSYS Ratio Deflection, in .049064 .049218 1.003 Slope, rad -.0045089 -.0045249 1.004 M, in-lb/in -13.783 -13.675 0.992 Stressx , psi -1323.2 -1312.7 0.992 M, in-lb/in -10.127 -10.133 1.001 Stressx , psi -972.22 -972.742 1.001 @ x = 10.81 in. @ x = 27.1 in. Figure 39.2 Window 1:...
View Full Document

Ask a homework question - tutors are online